I am putting two new belts on my generator after doing some other maintenance including a new impeller. I learned from the Westerbeke master distributor that there are no adjustments or easy way to put these new belts on. I was successful putting the outer "governor belt" on after loosening the...
Hey Gofirstclass,
I forgot all about our conversation until I went down and started getting my boat ready for launching in the next few weeks. Do you still have the trim material? If so, how much do you want for it? Let me know! Thanks, Buzzie
Thanks GoFirstClass, It's not the same as mine but it might work. How does it adhere to the platform? Two sided tape? Mine attached to the deck by slot that slipped on to the ridge on the deck, maybe that's why it's at the bottom of the river right now LOL.
Actually mine looks more like what cfd95 gave me a link to above: http://www.searay-parts.com/U-shaped-motorbox-trim-p/uchannel%20trim%20pltfrm%20mtrbox%20wh.htm
Does that have a ridge that slips over the edge of the platform? Mine didn't look the same but that doesnt mean what you have will not work. The strip I lost had about 1/8" slit (about the thickness of the swim platform on the bottom edge) and the material that could be pushed up on to the...
I lost the molding that slips on the edge of my swim platform on mySundancerr 300. I want to buy something close to the original molding. Anyone know what this is called and where to buy it?
Here is a video of an install I did on my 2003 Sea Ray Sundancer. It was a perfect install and it seemed as though it was actually made for my boat. I also put screenshots of the TV and swivels from Amazon!
The shore power is plugged into a GFI receptacle on land. The AC converter I mention is not related to the air conditioning. It is an AC to DC converter. So it sounds as though the AC converter does turn the charger on and/or they are one in the same. I will see if I can put a few hundred feet...
I have a 2003 Sundancer 300. I plugged it into shore power and thought the battery charger would automatically turn on. The small LED's on top are not turning on. Is there a switch in the electrical panel that needs turned on? Possibly the AC converter switch? The boat is still dry docked and...
What is WOT? It idles correctly, it does not accelerrate correctly when I add throttle. There is a slight hesitation like the engine is going to stall then it revs up normally. It seems like it could be a vacuum advance problem if it were in an old fashioned conventional ignition system. I do...
I recently completed a valve job and reinstalled the head on my 2003 6.2L MPI engine in my 30' Sundancer. (Serial Number: 0M358142). I did not mark the distributor when I removed it during disassembly (dumb move). When I reinstalled the distributor I used the procedure in the manual for when you...
Thanks BT. I saw a Youtube video and understand now. I will probably borrow one off a marina owner that I know. I think I can do this. Does not seem out of my expertise. Any good suggestions on buying a short block? Jasper? 6.2 Liters seem rare from my research so far. Is it the same as a 5.7...
Thanks Bt Doctor. I really appreciate your help.
I read about an alignment bar a while back. Do you have any additional information on how you use an alignment bar? That's the only thing that has me a bit hesitant about doing it myself.
Also, thanks for your suggestions about the bilge...