Search results

I thought I would update this post with the resolution. It was fairly simple, over the years apparently the remote mount that spins onto the block where the oil filter would normally be mounted came lose. There is a hose that mounts to the side and the bottom of the mount. The bottom fitting...

I just replaced both Teleflex 600A throttle cables on my 2000 270 Sea Ray Sundancer (Alpha one Gen II) 4.3's. Although the new cables improved a thotteling little, I still have noticable sloppyness at lower RPMs making it difficult to sync above idle.. Was hoping to get my hands on the owners...

I have a 2000 270 Sundancer with twin 4.3's w/remote oil filter kits. Been noticing small amounts of oil in the bilge coming from the port side of the port engine for a while. I jumped down in the bilge while the engine was running and the oil was coming from above the engine mount - what I was...

I want to replace the teleflex cables in my 2000 270 SD w/twin 4.3's. Have been told The teleflex cables listed in the parts catalog for my boat are discontinued. Wondering if anyone has already performed this and could provide insight.

So I checked and the solenoid doesn't have a reset or fuses. This is interesting because when I look at the schematic in the owners manual it shows a solenoid with 5 amp fuses on each side. Also couldn't find a pancake fuse in the anchor locker, just the windlass control box. I suspect the fuse...

Thanks, I'll take a look. I couldn't find it but will most likely need to look closer. I saw a red button (60) for the windlass by the breaker panel on the port side - pushed it in and nothing. That must not be it. I noticed above my batteries what appears to be a solenoid with heavy gauge red...

I'm in the process f replacing my Carling switches with Blue LED Carlings switches. Its been an adventure needless to say. When transferring the old Windlass/Main Switch to the new Blue LED i wants functioning and was trying to find the correct wiring and wound up either popping a fuse or...

Anyone have a line on how to replace these door panels?