Search results

Thanks Paul

Might sound like a dumb question, but where is the muffler for the IAC?

Hey Dale, Definitely happy it worked out.

Replaced IAC on Port engine. Problem solved. Engines is running great again. $140 for part, 15 minutes of labor and a handful of knowledge from club searay= A job well done.

Replaced the IAC's only four years ago. Planning to put new IAC on tomorrow and hopefully it corrects the issue. Will look at the mufflers also

Went for a cruise today and Port engine alarm went off. Engine did not give any sign of having an issue while cruising. Oil pressure normal, water pressure normal, batteries normal etc. Engine sounds like it's starving once I go below 1000 rpm. Also runs rough and occasionally stalls out if...

Nuteak removed about 4 square feet of flooring (location of screws), and six screw which caused the issue. Fiberglass company starting the glass work and repairs tomorrow. Nuteak laying new floor in the area but will not use screws in that area. Will keep everyone updated.

Update: Been on the phone all day. I have a professional fiberglass company meeting me on Sat with the owner of Nuteak (company that installed floor). Not going to stress anymore. Just want boat fixed right. I guess I wanted to do the work to get it done and back in the water. Like many of...

First: I apologize for saying haul not hull. My auto correct keeps changing it. I'm glad someone took the time to point that out to me :) Second: Thanks everyone for the replies. I was very stressed out over the past 24 hours and after reading your replies things are definitely better. The...

Thx for the replies. Grasshopper is calming down. Just spoke with the floor guy. This is the first for him so it's whatever I decide. He said he will pull the floor so I can remove the screws and fill. Than put floor back in place. I'm very happy with floor, it looks great and they did a...

Guys, trust me, I said the same thing. How the hell do you screw through my haul ( left out a few other choice words). I'm shocked because this is a good company. My understanding, is when you put the flooring in they put wood down first and than the flooring. The screw that went through the...

Well, right now I'm just sick in my stomach. Over the winter I had someone install Nuteak inside my cabin. I had the boat pulled yesterday to wax and touch up bottom and noticed 4 screws coming out of the bottom hull. It was not taking on water because the floor was done 2 months ago. After...

Removed 4 screws holding trucks inside track (upper side of door). Closed door and started to remove upper rail. This is where it get weird. Removed 3 screws holding rail. Upper rail is in 2 sections (is that normal) I was able to remove upper rail very easily. Rail was 24 1/2 inches long. At...

Went to boat today. Removed 4 screws holding trucks inside track (upper side of door). Closed door and started to remove upper rail. This is where it get weird. Removed 3 screws holding rail. Upper rail is in 2 sections (is that normal) I was able to remove upper rail very easily. Rail was...

Thx David, I inittially posted this thread here instead of repair section (I have a thread there). I've received some good responses from people. Going down this weekend. This is the reason I love this site. Everyone who owns a Sea Ray takes time to help someone else who has one.

Could be right on the channels, but again I don't want to (ASSume, classic). When I was on my boat last week I took the screws out from the upper part of the door (4 screws total, 2 on each side). They were connected to the trucks which sit inside the rails. Since the trucks fell apart I...

Dale, I'm not sure. I'm going down this weekend to start working on it. Did you remove the door also. After reading the thread Bruce sent it might not be that hard. Let me know what happens with you. I'll also let you know how it goes this weekend. I think in order to remove the upper...

Update: Enjoyed keeping the boat in the water doing the winter. Weather was crazy the past month or so (cold). Enjoyed going down during my free time during work hours. Had work done on it which worked out well. I think the only con I had was the BGE bill I received monthly. I had the...

Bruce, Thanks for that thread. Great read. I think I'm going to take on the job. Going to call Steve tomorrow and order the parts. Worth trying myself, I might surprise myself. Plus, don't feel like pulling out 1000 for the repair.

Thanks! Was it difficult removing the helm to get to door?