Search results

I have a 2001 260DA and according to sea ray, the original anchor was a plow and weighed 25#. It was made my Davis anchors, which may be out of business, part #is 1477389. South Coast Marine is the one sea ray uses now. Their number is 727 573-4821. Let me know if you have any luck!!

Thanks Kevin I must have had threads hidden, I saw your pics and explanation, it was awesome and will help me. I have 2 vinyl boards going across both my sides in cabin, that will be my main challenge getting them off. I'm looking at getting a Lewmar v700, Lewmar said I should get a...

I have a 2001 260DA and would like to see your pics, video or whatever you have. I can't seem to find a way to get from the helm to anchor locker. I don't know where to run the wire. Would appreciate any help you could give.

I have a 2001 260DA and I'm wondering if anyone has pictures, video or steps, showing how to run wires on starboard side of boat. I can get to the panel under the steering wheel, but after that I don't know what to take off or how to get to anchor locker. Thanks in advance

Do you have a pic of before and after with the dye?

Do you have a link for the pics of the dye before and after?

I have a 2001 260DA and I removed the rubber extrusion from the bottom of my canvas that goes into the top of the track in the windshield support. Vadney clips won't work with the 2001 and I believe other years, of which I'm not sure. It was old, hard and really wasn't easy to install. One...

I looked at your setup and it looks nice, but Brady said he only tapped out the wedges to 10-32 and you show a 4-40 insert. Did you try the 10-32? I'm wondering if they will fit the inside of the male snaps, guess I'll have to try a SS bolt if I can find that size.

I got rid of mine, I couldn't put the side pieces of my camper in unless I was in my slip. Then I would do one side and pull the boat to the other finger to get the other side. Saw my buddy snapping his easy from his boat and I was sold!!! You must be a contortionist to get your camper top...

Chris, how many of these wedges do you think I would need for my windshield all the way around? I'm curious to see how many you have before I order. Also, did you get the wedges drilled out to 10-32 as Brady was saying to me or 4-40 303 Stainless Insert for Metal that lawndoctor put up links...

Thanks for the info, did you ever get them and how much, if you remember, were they? Do I have to get the drawings off lawndoctor?

I've tried them and they don't work!!

Chris, where did you get the info to purchase the plastic inserts into the frame, I can't find it?

I've been looking all over for something to fit in my track. I have a 2001 260DA and had that rubber extrusion removed because it was hard and almost impossible to get in. Your info is outstanding and very helpful. Will this fit my 2001 track and where do I get the piece to slide into the track?

Is it really necessary to change fuel filter, oil filter and oil each season? I use Mobile 1 and was wondering if it will really prevent problems in the next season or not.

I have a 2001 260DA and had it pulled without removing the manifold, it made it by 2 inches. It's a 28 gallon tank, maybe you can do it without removing any other parts.

I agree with you Dennis, I had the same problem on a 2001 260DA 28gallon. I opted to have the tank replaced a for peace of mind. Insurance covered the labor,which I didn't want to get involve in and the new tank with a digital level gauge, filter and all the fittings was $799. Had the whole area...

Where can I look at it, is there a link?

Was thinking of applying some kind of anti-skid paint to my swim platform. Has anyone used any with good luck? I'd like to match it up to my arctic white gel coat on a 2001 260DA.

I had the marine mechanic pull my 28 gallon holding tank out of my 2001 260 DA. Even after I pumped it out he said there was 6" of liquid in tank, don't know why because this hose is powerful. Anyway, I have to go down tomorrow and look at it, he said It has 4 rubber feet underneath and one is...