shouldu the DC charger be hard wired to a switch when the boat is using shorepower or connected via a 110volt plug in the bilge. During a raft out a gentleman told me I should not have the 110 volt plug in my bilge because it is a safety issue. I think this is how the boat is designed and that...
Good morning, I have been looking at the photos of the transom bench seat, that you modified. Can you provide me with some lager pictures and the material you used to install it.
Thanks
Scott, my email is Landcastles@hotmail.com
Helllo: Searched the forums looking for a recommendation on where to put a carbon monoxide detector on our boat-could not find anything. We plan on putting the generator on the back of the boat when we use it. Any suggestions on where to mount the carbon monoxide detector. Thanks
I would like to purchase or put together a tool box for my husbands xmas present. he told me he is tired of taking his tools back and forth to the boat. Can anyone suggest a tool kit or tools I should purchase. I have no idea what to get. I think he would prefer to have the most important...
Pictures of our boat in photobucket - I find Photobucket easier to use, I also ran into the too big jpg issue in my SRC album.
https://s9.photobucket.com/user/seahag80/library/
Go to link, look on left side of page and go to bottom marked albums, click on album......
My husband and I just pulled our Bayliner out of the Riverbank Marina in Sacramento. We also have a 1985 Sea Ray Sundancer 260 that we just purchased she is in storage and we our in the process of getting her ready to go in the Delta in the Spring. We were looking at B&W just to get our feet...
Thank you for your suggestion, we will be taking your advice and removing all the screws. I did have the boat surveyed and the surveyor found no rot or moisture in the transom, thank goodness. I really appreciate your advice, I was going to remove the trim tab screws and reseal now we are...
Watching your thread closely. We also have the MF which I would love to remove but too big of a job. I will watch your progress and maybe get inspired to do the same. Alas, this would be a big project for me. I hear you can trim the fur down, that is something I can prbably handle - looking...
Well, I just got a call from the marine mechanic who is installing the new bellows ($800). He explained to me that the clutch for the throttle looked pretty worn and should also be replaced since we have the outboard engine opened up. So add another $650 and a gasket had to be replaced for a...
We have finally finalized the purchase of the above boat. I think the boat had two previous owners and the last owner had it in covered storage the last 4 years. The engine was repowered and has 917 hours on it. There is sun damage to the console and the pilot seat. Not terrible but it is...
Re: A Florida based 1987 390 Express Restoration - Westerbeke valve job
Your work is absolutely stunning. The engine work alone was unbelievable. I have looked at a lot of restorations online but your restoration completed by a private person (yes, you have the skills and equipment) is the...
Can someone please direct me to a location that explains how to post images from photo bucket to a forum post. I have "searched" the site and cannot find a link. I know I have seen it somewhere on the CSR site. Thanks
I would recommend checking all the threads on this site. Every question you have asked has probably been addressed before. I also recommend learning how to use photobucket or the CSR site photo album feature and upload photos of some of the issues you inquired about. There are so many people...
Re: new owner 1985 sea ray sundancer 260 question w/pics
http://clubsearay.com/album.php?albumid=1326
Trying to see if this link works to my CSR album. Pictures of transom bench w/wood paneling and jump seats with wood paneling.