Thanks again Bill. Found the previous post with the link to roller replacements. I’ve placed an order for them. Does the bottom of the door come off to replace the rollers? It looks like it is welded on, but maybe it will be clearer once I pull out the door.
One final questions...how does...
Thanks Bill! Are there only 2 rollers on the door or more? How difficult is it to get the door out? I probably should replace my damaged screen door (guest bent the frame) as well since it looks like I have to pull the whole thing apart.
Any suggestions on how to adjust the cabin door on a 2001 400DB? The door ‘sticks’ when trying to open, it appears to be the back rollers. If I just use the latch and try to slide the door open, it won’t move, but if I lift the door slightly, it opens just fine.
Any chance you can send me a picture of where this screw is? I have not been able to remove this coffee maker in 2-3 attempts. I must be missing something. Did you replace it with a new coffeemaker or just use the space for extra storage?
I'm starting to plan an electronics upgrade of the original 2001 vintage Raymarine equipment and would love to see/hear what others have done. Feel free to email me (kurtlentsch@gmail.com) any pictures or details of what you went with (I'm leaning towards RayMarine again) and I would love to...
Asking for a dock neighbor...2003 380 Sundancer, coming back from a boat ride today his Mercury SmartCraft was in alarm (very loud alarm, by the way) stating that "Communication Lost with Engines". He was getting Port and Starboard engine alarms for Communication Lost. We had to turn off the...
Do you have 4 starting batteries? Mine are Crown MAR-1000X which are now discontinued. Crown recommended the replacement with their Crown 27SDC-XD which are their Marine Severe Duty Batteries.
Any thoughts or comments?
Battery setup on 2001 400 DB...?
Starting to think about replacing my 4 year old batteries that came with the boat when I bought it. I looked at the wiring diagram for the boat and discovered that the 4 batteries are wired in series, 2 batteries per 'set'. One set is for the port engine and...
Asking for a friend...looking at a 400 Sedan Bridge in the Kentucky Lake/Paducah, KY area and needs a good diesel surveyor to survey the engines. Anybody have any recommendations?
Boating Season came to an end for us yesterday. We had a beautiful crossing from Chicago to Holland, MI to put our boat into storage for the winter. A great 95 mile to cruise to end the season!
LIFERAFT ONBOARD?
Does anyone carry a liferaft onboard your 400DB? If so, what brand/size and where do you store it? I am considering purchasing a Viking Offshore 6-Man Lift Raft and storing it under the bench seat in the cockpit. Being that my boat is still in winter storage, 3 hours away...
Just as easy, remove the 4 screws on the steps from the salon to the galley (2 on the top step and 2 on the bottom of the step). The steps slide forward to give you access to the A/C unit. You also need to disconnect the 2 12 volt wires to the light fixture in the step to completely remove the...
Trying to help a boat neighbor and looking for a set of used canvas for a 2003 380 Sundancer, prefer tan, but black or blue works too. He's lost a couple pieces in a storm and hasn't been able to afford to replace them.
Appreciate any help!
To follow up on this issue, I contacted Sea Ray and sent them a bunch of pictures and this video. They explained to me that it is not a common occurrence, but it appears the seam on the arch had failed. After discussing this issue with them and sending the same pictures and video to our local...
Thank you for the pictures! I ended up installing a Taylor Made Stainless Steel Flag Staff. It is surface mounted to the starboard side of the trunk on the top of the transom. We're in BURNHAM (P Dock) if you are ever cruising through. I'll look for you next time I am in DuSable.
Kurt
Anna...
Mark - Thanks for the comment. I don't think it adds any stress to the arch since the canvas is supported by the rails of the enclosure. I've contacted Sea Ray via e-mail and will wait a couple days for a response before I give them a call.