Thinking of selling my 2000 340DA. We are on a fixed income and really can't afford to keep it.
I'd like to sell it "AS IS".
It does need some work. Needs new isenglass, ice maker needs repair, Westerbeke genny has a seized raw water pump, one salon cushion needs mending. Bottom paint. General...
I'm missing page 31/32 in the "Owner specific information" that deals with the bed configuration in the mid state room.(don't know why it's missing)
If someone could scan said pages I would be very grateful.
TIA
WD
My shower sump box has a crack and leaked into the Mid stateroom sump who's pump crapped out, so now I have water to clean up.
Has anyone repaired a crack in the box? (LOL) What kind of plastic is it? If it's PVC, it should be easy.
Cleaned out a clog and replaced duck bills while in there. Vacuum builds fine and pump shuts off, but starts again after a few min. I can hear a "hiss" near the vacuum tank end. I greased the rims of the valves when I put them in. Should I have put tape on the threads?
2000 340DA
The bowl on my vacu-flush is cracked from the previous owner not winterizing properly. I have the searay part number (270298), but cant seem to cross it to the Dometic products. I found this, https://www.dyersonline.com/dometic-sealand-vacuflush-white-toilet-bowl-kit.html and was...
The bowl on my vacu-flush is cracked from the previous owner not winterizing properly. I have the searay part number (270298), but cant seem to cross it to the Dometic products. I found this, https://www.dyersonline.com/dometic-sealand-vacuflush-white-toilet-bowl-kit.html and was wondering if...
This season, I've been using No-Flex religiously and my sensors failed to the point where I overflowed the tank. I had used Happy Camper previously with no problems. I read about No-Flex, so I thought I'd try it.
Guess I'll go back.
I won't be able to get to the boat for a few days, but I need to know the intake hose size in a 2000da 7.4 MPIs. I think it's 1.25" or 1.5" but not sure which.
TIA
Thinking about adding a macerator to my 2000 340DA. There is a place on the panel for the switch, but is the wiring there? Aside from adding the pump and a thru hull, what else is involved? is there a fitting on the tank, or do I have to tee off the pump out line?
TIA
I want to buy a mattress topper for the v-berth, but I don't know how big to go so it fits when cut to shape. Will a queen work?
I know this has been covered elsewhere, but can't seem to find it.
2000 340 7.4 ltr. MPI. Had both done a couple years ago, now starboard is not pumping water. Pretty sure I can squeeze in there and do it myself. Want to make sure i get the right one.
Posted this in the electrical forum too. I keep burning out thermostats on my water heater. This is the third one in 4 years.
Any ideas as to the cause??
'02 340 DA. When it rains, I seem to collect a lot of water behind the captain's chair at the helm. It eventually drains away somewhere (takes a long time), but leaves a lot of dirt behind. Any ideas as to a solution? Am I missing something here, or is this normal?
The pump out boat has broken off my "clam shell" vent cover 4 times over the years. The last time, it's beyond repair and needs replacement. I have a SR part number (688721) but have had no luck finding it online. Haven't called a SR dealer yet. That's the last resort.
Any suggestions?
Also...