Search results

I have a 2004 Searay 500 Sundancer, same thing going on in my bilge. A friend of mine has a 2006 52 Sundancer, same problem. Apparently, from the information I found is that the gelcoat has a wax base and the paint applied to the bilge peels off, some small pieces, some large. I've been cleaning...

I'd call Marine Max in Brick, they'll have a recommendation for you. I spent 25 years on the Barnegat Bay near Toms River and Pine Beach. A good recommendation would be Capt. Rob Cozen, he did a survey for me a few years ago and did a good job. I don't know if he's in the area any longer, but...

Sorry for the late reply, yes it's works fine. It's a 2003 year of manufacture, version 1.00. I ran the boat to Naples, Fl from NC. I'll be back to Naples on the 30th of April if you want me to send some pics. I replaced it with a NOS 2006 version 3.30 with more features. Thanks, Bow Tie

Hi, my impellers use a large bolt with "no shoulder" they are threaded on the entire bolt. You can buy them online. I also use a 1.25" 1/2" drive socket, they take about 15 minutes to remove and install the new impeller. I also use a silicone penetrating spray very liberally in the vanes of the...

Hi, I don't want to steal the post but can anyone tell me if there is a easy fix for a ACR 100 that will move side to side using the remote. However, it will not move up and down. This is my second Searay with this light and have the same problem on both. When they are new they work great but...

Hi, Searay has a few different ways to secure the back to the cockpit. One way they secure it is to through bolt it from the top into the lazarette. To remove this type, take your seat cushions out and look for black tabs with screws, remove the screws and go into the lazarette and look for...

I have a SmartCraft SC5000 display for sale, mfg date is 2003 version is 1.0. Everything works great and it comes with the cover. I'm looking for $300. plus Fedex shipping. I can email a picture if you send me your email address. Bow Tie

When you add a "mattress" topper you are adding to the thickness of the mattress, the mattress on our boat is only 4-5" thick but after adding 2" memory foam and a mattress topper I needed 9" side on the sheets. It's no problem if you tell the sheet manufacturer, if you don't your sheets will...

Hi, I recently ordered two sets of fitted sheets with 600 thread count from yachtbedding.com. Not cheap but a real good quality and fit. They will probably have your template in there library. They also modified the sheet to accommodate the extra thickness of my mattress. All in all a very good...

Hi Jeff, I assume that you have shift cables? Also, how is forward? You said N to R was inop, but did you try forward? If you have nothing going on FNR check your shift cable at the trans and make sure it is moving the shift lever at the trans. If your cable is not moving the lever, you may...

I'm looking for a complete hydraulic swim platform hardware off a salvage boat. Anybody with information leading to the purchase will be paid a "finders fee". Thanks, Bow Tie

send me a email if you are interested. Thmann@optonline.net Bow Tie

Hi, I have a 500 Sundancer salon table for sale. It's cherry with a wood burl inlay. The table is oval and is in good condition with no damage. The PO changed the table to a custom top and I don't need it. The resin top should be removed and refinished for it to look new. If you're interested...

If any owner of a 2004-2009 500/52 Sundancer has their boat out of the water. I need the measurement of the distance between the prop hub and the strut. I'm trying to buy a pair of line cutters without having to do two short hauls. If I get the measurement I will only need to haul the boat once...

Thanks for the info, as long as I have access I can fix it. Bow Tie

Emagine, I removed the carpet and access covers, no leaks. I'll have to go further with this as soon as I get some time. Probably something simple, the forward emergency pump only cycles when the tank is topped off using the starboard water tank fill. I'm moving the boat to NC for the winter on...

Emagine, thank you very much for the info, big help. I suspected that's the access area, I just didn't want to guess. Thanks again, Bow Tie

Steve, I didn't feel any seam in the floor, the carpet is thick enough to hide small or flat head screws. Looks like I'll be cutting a rug this weekend. Thanks for your idea though. I just don't like to remove anything unless I'm sure about it, maybe I'll cut out the entire carpet inside the...

Thanks for the info, so far so good Bow Tie

Hi, I need to confirm the access of my water tank located under the salon sofa storage before I take up the carpet. Is there a pre cut access hatch under the carpet? Thanks, any info is really appreciated! 2004 500 Da Bow Tie