Search results

  1. Zorba

    Cool Fuel Gen III delamination 2006 8.1s

    I may/should try this first. Care to share which wires you went with if not the $400 OEM?
  2. Zorba

    Electrical Gremlin, ECM/IAC related 8.1s

    Again, i think i know the answer here but want to bounce it off you guys. At the end of the '16 season while at cruising RPM (3350) very occasionally I would lose about 500-600 rpm my gauges and vessel view would lose contact with the starboard motor. The RPM loss was very quick, just a hiccup...
  3. Zorba

    Cool Fuel Gen III delamination 2006 8.1s

    I think i know my fuel issue but want some confirmation. I dealt with it last year in the hopes i could change my plugs and get peak performance again as usual, but alas at the plug change still could not make WOT RPM (4100 is best i could do) and still had some significant trans rattle...
  4. Zorba

    Port Clinton ,Sandusky area

    We are at Marina Del Isle as well. Been there since 2007. Great facility and great people. To the OP what marina are you at in West harbor? Eric, are you on A dock next to Mark and Ken? I'm on B three spots from the end.
  5. Zorba

    Things that make you cringe...

    I did educate him on proper technique. He was thankful but still didn't quite grasp what he was doing wrong. What is more concerning is that before I saw it, at least 4 people praised him and told him great job. Sent from my iPhone using Tapatalk
  6. Zorba

    Things that make you cringe...

    Came across this gem today on a facebook cruisers page. Hope there are no animals looking for kidney failure within a mile radius of this fella. I'd also like to meet the guy who told him this was ok. Sent from my iPhone using Tapatalk
  7. Zorba

    Mustang

    The way to dock at most of Put in Bay, not just the public docks, is side tie and rafting. This is a resort island so if you are coming you will be there for the weekend. IF is it necessary for a boat to leave on Saturday and they are not the 4th boat out the some of the neighbors will get...
  8. Zorba

    Mustang

    Very nice. She definitely stood out of the pack. We were docked right across from her but i never got to meet the owners. Did they bring her over on her own bottom or transport? That is our lovely Lake Erie sea grass. You can walk on it this time of year.
  9. Zorba

    Mustang

    Is this the infamous Mustang built by Dale? She sure is pretty sitting here in Put In Bay! Sent from my iPhone using Tapatalk
  10. Zorba

    Problems with my Waeco refrigerator............

    Awesome. Thanks so much for your quick reply. New MPS 50 on the way and will repair old one as a back up. As an aside, the marina we stayed at this weekend only had 50amp power and we split that to two 30's. Wonder if that was the issue or if it was just coincidence.
  11. Zorba

    Problems with my Waeco refrigerator............

    Going to revive this thread. I'm having issues with my fridge but the opposite of whats going on above. When solely on AC power, the fridge has stopped working. No power to the compressor and no light on in fridge when door open. I pulled the fridge our and plugged it in to another outlet to...
  12. Zorba

    Trip to Cedar Point from Lake St. Clair, anyone?

    It's an easy trip. Here is the route we took last year to metro beach. http://webapp.navionics.com/maps/#show/kml/https://social-sharing.navionics.io/upload/1434729518014/1434729518014.kml@11&key=_zi%7DFn%7DpxN We stayed in the shipping channel on the way there for the same fears as yours...
  13. Zorba

    Official 2003.5-2008 340 Sundancer Thread

    HERO-LED BG4EX-9T-WW Extended Back Pin G4 LED Halogen Replacement Bulb, 1.8W, 15-20W Equal, Warm White 3000K, 5-Pack (Not Dimmable) https://www.amazon.com/dp/B00QE2TPAO/ref=cm_sw_r_cp_api_bkLNxbH42FZ4K Alex
  14. Zorba

    340 exhaust fan question?

    I believe there is only one fan controlled by two switches. One in switch in the head one switch in the galley controlling one fan somewhere in the middle. Thats how my 06' is set up at least.
  15. Zorba

    340 exhaust fan question?

    You are correct. There should be two switches to turn the fan on and off. One in the bath room and one in the galley under the microwave. There is also a switch on hte DC side of hte breaker panel that needs to be turned on. As someone else stated "power vent
  16. Zorba

    Does your 8.1's blow steam out of the exhaust?

    Perfectly normal. YOu can see it throughout this video. This was early season so colder water but still present even today. https://www.youtube.com/watch?v=qOp7x8DX3pc&feature=youtu.be&t=10
  17. Zorba

    2016 Summer pics....post them.

    A few from the last few weeks. Put In Bay, Marblehead, Cleveland. First shot is our view for the next two days. Alex
  18. Zorba

    Official 2003.5-2008 340 Sundancer Thread

    Thanks for the replies all. Alex
  19. Zorba

    Official 2003.5-2008 340 Sundancer Thread

    Has anyone replaced the cockpit ice maker? If so is it haywire do to ac or is there a plug hidden back there? Alex
  20. Zorba

    Official 2003.5-2008 340 Sundancer Thread

    This may seem silly but take the drip tray out. I had the same symptoms and this worked for me. Alex
Back
Top