Search results

Located in Savannah. Excellent oil samples. See in Yachtworld for 1996 with price of $89,500. Can do a private deal, maybe. Have turned down an offer of 77K. Trade boat must be within 500 miles. Also want cherry wood. Call 912-777-5034 9 to 9ET Done cruising so just need smaller.

Our 1996 was run aground hard by a delivery captain. Per the surveyor report to insurer, all running gear essentially needs to be replaced except the shafts TBD. He also figures on pulling the vDrives back to ascertain if coupling plate damage etc. The yard has about a $27K estimate not...

For when I only have a single 30 amp choice on the dock, can I jump the two on the boat? I know I can buy a kind of reverse splitter for $175 which does that, but it seem it would be cheaper and simpler to combine on the boat with a 30 amp two pole switch. 1996 44 EB

I need to open up the gate to through bolt the hinges because all the wood or sheet metal screws are not holding. There is a seam and a gasket so I assume this can be done easily? I am sure there are previous threads but my browsing is awful: never returns any hits. Thanks in advance.

I had poor water flow and overheating starboard engine. Cat tech replaced both impellers and they were bad, esecially stbd. Now I am paying lots of atention to cooling flow. In neutral at dle, lots of flow.In forward or reverse at low rpm, hardly any. I saw one post abut bypass but it was...

Y'all may have seen my post a few weeks ago about my concerns over the sea trial and rpm. Anyway, things progressed. We bought it and moved it from Little River, SC to here in Savannah. Took 17 hours tach time so 15 knot average and about 200 gallons for the 245 miles. Is that about right? When...

Bought a 96 440 EB last week with sea trial today. Impressions: steering seems slow at slow speeds, top speed with 350 hp original 3116 with 1100 hours seemed slow at 22 knots. Tachometers were erratic and probably low reading but stbd engine was 2950 rpm and port was 2600 but again, tachometers...