Search results

Well, everything is back together. I was able to get a direct tank replacement from Dometic with all new grommets and seals. Putting it back together was pretty easy. In the process, I also installed a new discharge pump, converted the aluminum exhaust manifolds to the upgraded cast iron...

Yes, I was able to get a direct replacement from Dometic. I worked with Emarine (WWW.ENVIRONMENTALMARINE.COM). They were great, I sent them photos of my old tank and they had Dometic setup the tank with all the fittings in the right places. The whole tank less the Vacuum generator (I reused my...

ITS OUT! ! !:) Pulling it out was actually the easiest part once everything was disconnected. I've added some more photos including the leaking insert on the bottom, pretty poor design for this to happen.

Many of the faucets use common fixture parts. If you can get to the failed fitting or line you might be able to find replacement parts at Home Depot or Lowes. Also if you can find the faucets manufacture model # you can try them directly for replacement parts. If you want to replace the whole...

Well I removed a bunch of stuff and unbolted the tank. 100% confirmed its leaking from the bottom. I have about 17” at the tightest point by the cooling tank but I can pull this to gain several more inches. It looks like I can slide it forward and bring it out at an angle. I think it will come...

Thanks for all the feedback! I'm going to take some more measurements and photos to post. I'm also now in contact with Dometic who has been really helpful, unfortunately there's not much help they can provide on the out and in clearance. Some good news is that I can still get a direct...

Looks like I have the unfortunate problem of a leaking 42 gallon Sealand holding tank. I looked over some of the other posts here about repairs on similar boats but I have so much work into finding this leak already, I just want to replace the tank. Looks like the leak is at the forward corner...

What happened to my account?

signature test

Hi There

First post, just testing