We are looking to get away for a long weekend and want to try something different. We usually travel all over the LIS through the summer, we have trips planed to Block, New Port, MTK, Mattatuk, Old Saybrook, and a south shore trip planed too. However, next weekend we want to do something...
This worked 2 seasons ago and the Raymarine display burned out. So I replaced everything with new Garmin stuff. I assume the radar works fine but rather sell it as a parts unit as I have no way to verify it’s current status.
make me an order…. Otherwise I’ll put it up on eBay.
I recently installed new MFD’s and have no more use for the this. It works perfectly, as good as new. It comes with the power cable and NEMA cable too.
Looking for $OLD obo also comes with sun cover too.
This has been sold.
I recently installed new MFD’s and have no more use for the this. It works perfectly, as good as new. It comes with the power cable and NEMA cable too.
Looking for $675 obo also comes with sun cover too.
I have a leak in the main salon. It is coming from somewhere on the deck. Not sure if it is the screws that hold the windshield to the deck, the two deck rails, or the skylight.
The water is coming out of the overhead light fixtures closest to the skylight, so this leads me to suspect the...
I am running our boat up the coast and experienced a temperature alarm on the Port ZF80 gearbox. We verified the alarm with an IR gun and the box is running at 270 when running @ 80 % load.
After pulling into port we verified a few things.
Water to hyd Oil Heat exchanger is clear and...
I am looking to have a S.R. surveyed. I would also like a Cummins tech do a mechanical survey too. Any recommendations are appreciated.
I don't know the area, so if anyone has a recommendation for a yard that will be reasonably priced for the short haul, that would be a big help. Anything...
Yesterday I was moving a 390 with Cummins 5.9's and encountered an odd issue. Every time I throttled up to get on plain the port motor would die. When I tried to restart the motor, the engine would turn over, but it would not fire up. After some investigating I realized the breaker labeled...
I own a 2001 340 Sundancer. I’m having a problem with my freezer door. It will not
Stay closed causing a frosting/ice buildup issue. Fortunately, the fridge and freezer both still work well from a cooling standpoint. Pictures attached. Recommendations appreciated. Thank you in advance.
We have been going to BI for the last 3 years. We usually run straight to BI. We stay at Champlain’s for 3 nights and on the way home to Sea Cliff (North Western Nassau) we stop for 2 nights in MTK or Old Saybrook. However this year I’d like to try something new, and I’m willing to go a bit...
The bottom of my boat is in lousy shape. I purchased the boat mid summer last year and knew that I would need to re-do the bottom at some point and would like to do it b/f I splash this year.
Have any of my fellow Long Islanders done this b/f and if so, please share your recommendations for...
I would like to barrier coat and paint the bottom b/f I splash next month. However, I would like to get the bottom media blasted first.
Have any of my fellow Long Islanders done this b/f and if so, please share your recommendations for someone who can do surely blasting.
I have winterized all my prior boats. But this will be my first time winterizing inboards. Am I missing anything in the steps below.
Open the top of the sea strainer and insert a garden hose, turn the hose on, then run the motors on fresh water for 3 to 5 minutes, (towards the end I plan to mix...
I installed a new shower & air conditioning sump pump which isn't getting power. When I hooked it up on Thursday it seemed to work fine. I went back to the boat last night to get ready for a trip and noticed the sump pump wasn't working. After poking around I also noticed the A/C and the stereo...
Looking at options to replace the refrigerator on my 30 foot sun dancer. Hoping to not spend an a ton, but want something a bit newer and fresher than the original one that's there.
I recently winterized my motors and fresh water system. I wanted to service the outdrives b/f winter layup. I was intimated to take them off myself, so I requested my local marina to service the drives for me. I was reluctant to have the marina do any work to the boat, but that is another...
I replaced my transom mounted stern light fixture with an LED unit purchased from West Marine. However my mast light is staying lit in the fore and aft position (illuminating 360). Regardless of the position of the light switch, the mast light stays fully lit (as if I am anchored). Could this be...
I came across this nice looking P32 for sale in MI and it turns out the seller is a guy whom I almost purchased a twin big block P-27 from two years ago. Unfortunately I miss buying his P27, but later got a nice P-27 out of ME.
Anyway, I thought i'd post the Craig's list link as its a rare...
I replaced the exhaust manifolds, extensions,and elbows toward the end of last season. However, I did not get to use theboat much after doing the work. I notice the elbow on one side is very hot.When I put my hand on the outer elbow (top part) it is very hot where all ofthe others are just warm...