Search results

  1. N

    1988 Sea Ray 268 side window leaking

    Hi all One of my longest side windows is leaking. Have replaced the flocking and cleared all the drains a year ago but the window still leaks significantly towards the front berth under heavy rain. Nothing visible from the top so thinking it cannot be bedded in on the bottom sealing surface...
  2. N

    268DA V6 twin 19p prop options

    Hi all This NZ winter we have replaced our tired 1988 V6 motors in the 268DA with some late 90"s vortec 2bbl Tks motors offering 190 hp at the prop. So total hp is probably similar to the original 205hp engines which were measured at the flywheel. Engines are a lot smoother and now have top...
  3. N

    1988 Sundancer wiring diagram required

    Replacing one of our 4.3l twin motors and decided to tidy the stray wiring in the bilge area. But now I appear to have removed power from the water system pump and need some wiring help. Particularly interested in info on main wiring, the rear transom fuse block detail and my twin motor battery...
  4. N

    1988 268 Sundancer - rain water issues

    I have a 268 on a swing mooring with an intermittent bilge pump that needs attention, but my actual problem is with water after heavy rain. This morning after 2-3 hrs of heavy rain, I went out to the boat to find around 3 inches of water (maybe 5 -6 gallons) below the twin engines. it is...
  5. N

    Ultrasonic antifoul for Sea Ray 268 on mooring

    My 1988 268 has been on a swing mooring here now for 18 months and has been under attack from all quarters, seals on the swim platform, seagulls on the canvas and barnacles/weed on the hull and outdrive. The most labour intensive has been the barnacles, requiring the hull to be trailered every...
Back
Top