Mine is an SDA, allot different than your 270. (I think there is another thread for your boat BTW, just a heads up :thumbsup:.) My pump is located in the engine compartment with a bottom discharge.
Could someone please post a photo of their macerator setup? My 270 had the option, but it looks like everything was removed and capped off. Trying to determin how it was mounted, and see how the hoses were routed from the factory. Thanks! :smt001
I need to have a center stringer rebuild on a 30' boat, I am looking for recommendations for people or shops in the area to get some quotes.
Motors are out and boat is de-rigged and ready for work.
I am located near solomons island and the boat is on a trailer and can be transported...
Hey, thanks a bunch. Mine has an offset spacer under the table side bracket that makes the table higher in the rear of the boat. It was a nice addition since it makes the table more level while the boat is at rest. The downfall is I don't think you can convert it to a sun pad with the offset...
Well I went ahead and installed the table with the spacer, since it allows the table to sit level while docked. Not sure if it is factory or not, but it works well.
Also installed a 32" TV in where the bow mirror is, used strips of 3" x 3/4" oak spacers and industrial Velcro. Photos upon request...
Can someone do me a favor and snap a photo of the bottom of their cockpit table? Is there supposed to be an offset spacer, to make one side higher?
Thanks!
You have a completely different boat, their recommendation to him may be very different then what they offer up to you. Unless you are just asking for his wording on his request???
Also being a '90, they might not have any advice on the in-hulls style transducers.
I am working out my plans to update my system on my 270 and came across your thread. Care to share your experience with your mounting location? How did the sound turn out? How about your bow mounted TV setup, what route did you end up taking for your antenna?