Search results

Thanks, guess I'll look into it a bit more in the spring. Purchased end of last year and doesn't seem to be working. I'll have to check the level.

I’ve been looking through posts this morning but have been unable to find much information if others have added hydraulic steering to a 2018 190 SPX OB? It’s a shame Sea Ray did not include this as a standard feature on this boat. Any information would be greatly appreciated.

Wow guess these actuators or actuator components all fail at around the same time , because I too am having issues. I'm not electrical savvy but the link provided to bypass all the Linuk components seems like an option. Wish someone that fixed this issue without reconfiguring it would chime in...

I replaced all my batteries on my 330DA with AGMs several years ago and have been very happy with them.

No it is not higher than the drain and the drain seems to be clear.

I’m going to try and put it on a bigger angle.

I can see it if I open the battery compartment and stick my head inside. The only other way would be to remove the access panels from the storage compartment.

Been searching the forum for a few days and haven’t found anything. I have a 2018 SPX 190 with a 150 Mercury OB and hoping someone can explain how the drainage system works. I washed the boat (drain plug is out) and expected all the water to end up in the bilge and then out the drain plug. A few...

Anyone ever removed the main panels to get to the back of the radios in the cabin on 2008 330DA? I’m trying to hookup a fusion bt100, but cannot get the panels out. Seems the radios are attached from the inside?

Thanks for all the help. Cleaned filter & checked voltage and AC seems to be working correctly now.

OK thanks and that’s good to know. I’ll try and run it while I have my generator on to see if it still happens. I’ll also give it a cleaning since I have the panel off.

When running my air this weekend I got an error message on my Turbo Cruisair 12K, SeaRay PN 1907352 that says the AC is low. Haven’t found any threads that say if this can be recharged, so wondering if anyone has had a similar issue. The air will work and cool, but kicks off from time to time...

Thanks and my boat only came with the M1 Tracvision. When we used to spend weekends on the boat paying monthly made sense, however now we only use the TV when on long trips it doesn't make sense. I did buy a digital antenna and my hope is to somehow use the current cable to the M1 and just move...

Hello, Currently have a M1 Tracvision on my 2008 330DA. Since I don't have Direct TV it's basically useless, so I'm wondering if anyone else has converted from Satellite to a Digital Antenna? I have some ideas as to try and do this, but maybe someone has done this and can give me some pointers...

Thanks for the information Bridog. I believe my top speed so far WOT is around 44-45 mph. Probably not as concerned with going much faster as I am with cornering performance through the cuts. I was hoping a change to a stainless prop would help with this performance without losing top speed.

We take it through cuts in the lake and it seems when making sharp sudden turns we lose a bunch of speed. It also seems to have a lot of cavitation (at least that’s what I’d call it). Also wouldn’t mind a bit more top end speed. Out of the hole even with 6-8 people it seems to do pretty good...

Harden Marine also makes a Stainless Steel version of these plugs. http://www.hardin-marine.com/p-81079-stainless-steel-lifetime-series-sea-pump-drain-plugs-mercruiser-22-806608a02.aspx

Turns out the dealer gave me the wrong part number. Never checked the bottom of the actual sensor, but the correct number is 8M6000623.

Wondering if anyone has changed the stock Mercury 150 aluminum prop on a 2018 ‘19 SPX OB? I’ve read some online and it seems most fisherman switch to a 19 pitch Tempest or Enertia, but haven’t seen much information about a prop change on Sea Ray outboards? Thanks in advance for the suggestions.

Looks like this part number cross references to the one I used. Guess I’ll need to contact the place I bought them from.