Recently change all dash gauges to Faria Euro Dress White.
Can't get the Sync gauge to work.
Did anyone know if the Teleflex module in our 310 (got a 98') is compatible with the Faria Sync gauge?
Everything else is working ok.
I was going to do the same thing, but after checking the original foam was in good shape.
Bought a 2" memory foam from Sam's Club. A new cover was done with the memory foam included with the original foam.
I'm happy with the results.
On the front v-berth starboard side, on the division panel that holds the curtain you'll find one and the other one is the aft cabin, starboard side also, that one is easy to find.
I recently change mine, let me know if you need further help.
Try yesterday to install my transducer inside the hull without any luck.
Got a Hawkeye D10D Depthfinder, reviews were ok online.
Everywhere place still don't get any reading, I was using vaseline on the transducer as the instructions recommend but nothing.
Also try the zip-lock bag full of...
Any experience here with shoot thru hull transducer in our 310's?
My Lowrance 3500 display is dead and really need a depth finder right now.
Trying to avoid a transom mount unit.
I believe you should be able to adjust your shaft seals without taking your boat out.
My mechanic recently adjusted mine, but these were change two months ago while I was doing the bottom.
This is the third time that these are adjusted, somehow they seem to leak again.
Hey Vida,
I have 98' MAG MPI 5.7 Mercruiser's.
Injectors don't seem to be clogged, they are crossed (burn at the plug - in spanish: "cruzados").
Yesterday I change another one, same history, burn at the plug, the engine gets very sluggish with the bad injector.
I have checked the wiring...
Fuel Injectors... who has problems with these? I got a 5.7L MPI MAG Mercruiser engine.
Part # for the injectors is 861260T
Got all 16 injectors checked and analized before installing them. 4 of them were changed because they were damage.
After installing them and running the boat, 1 of them...
Thanks for all the suggestions, I'll work on them and report back.
Got so many questions... this forum has great info.
Power Vents, just change a blown fuse on the main panel that I tought was for the Power Vents, but these are still not working. Where is located this motor?
Anyone using a...
Head system question: is the vacuum pump always making noise when turn on? Mine seems to be not closing properly somewhere. All the seals from the toilet has been changed but still same noise. Any suggestion?
Any suggestions for the engine room gas struts?
Mine don't have any when I bought it and not sure of the exact specifications.
Also, trying to find the part # for the transom rub rail end caps, not sure if that's the correct term!