Search results

I would appreciate any help anyone can provide. I have attempted to search and drill down to find the info on the conversion to LCD I require but it seems somewhat scattered. What I am trying to find is part numbers for the replacement of all of the bulbs on the boat to LCD. Going through my...

Yes I will attempt to attach the schematic here. If anyone has any luck finding stock of this please let me know. Juggernaut1 you have to tell me, where did you get that rear extended roof ? Is it a custom top ? Is it fiberglass ?

Thank you Seadawg VB for your input. I did start with SkipperBuds which led me to Taylor Made Windshields and further the Sea Ray dealer here in Ontario. All were helpful but the short version is that the part is no longer available. I found from Taylor Made that the part number is # 41100207...

I am looking for a part number and or supplier to replace the rubber gasket/molding that attaches to the frame of the vent in the center of the windshield and the glass vent rests on. The worst is the bottom portion which has started to tear away. It is in pretty rough shape. I tried to search...

Has anyone installed the Weaver davit system to a Hard hull Walker Bay 8 and a 2006 380 Sea Ray or have seen it done. Weavers site looks like a neat way of doing it wth a specially designed system but I am concerned that the height of my swim platform ill not allow t to work properly. Thanks

I am considering installing a Bow thruster this winter and of course would prefer to go with a thru hull version which would of been original equipment however I have come across this exturn product as an alternative. Has any one installed one of these and if so how well does it work? Would...

Thanks everyone for the help. I am on the boat this coming weekend and will check all of these things out and let you know what I find. Thanks Again !!!

There probably is a thread on this already but was unable to find one. I am having trouble with my Generator to keep it running it will start easily every time but will not keep running. It runs for approx. 3 to 5 mins. then shuts down. The boat is new to me this year and I do not have much...

I have been following this thread with interest. I too am considering all options for a dingy. I want to stay small only to get to the beach and maybe around the marina with the odd time exploring some inlets off of the lake. I am wondering about the option of going with a rigid dingy and have...

Thanks Silly Knot 2 that makes sense to place it away from traffic does it put out any light in the water even a slight glow ???

HHHmmm that doesn't sound too promising I may have been Bamboozled again. If I did decide to try it what would be the best way to connect it to power and or a switch. Thanks for your comments.

I picked up a drainplug led light at the Toronto Boat show. I am wondering if any one else has installed one of these on a 2006 380 and the best way to do it. I am wondering if connecting to an existing cockpit switch would be a good idea. Also wondering what I can expect for light. It has...

Grayzone you have an extended platform which drops down toward the water I think from the picture. I am more like Tobrie7 's problem where I am anticipating a very high platform to water height. I think he means close to 2 ft not inches. The lift even with the extensions may be extreme. My...

I have been looking at alternatives to load a dingy as well. I just bought my boat in the fall and have not had it in the water yet.( It is turning into a very long winter) It is a 2006 380 and I am not sure of the height of the platform out of the water. How high is your 380 and are you...

Thanks for the suggestion I will check with some automotive guys in my area.

The transom door on the 380 dancer opens aft from the center of the transom. It is made from a different material from the rest of the hull and transom. I think it is some kind of Acrylic but not sure . I am guessing it is made from something different to allow the curved shape it is. I have...

Thanks Everyone for your suggestions between what I received here and the other threads that I found that dealt with this same issue here. I have enough now to search out the right option for me.

Thanks for the info I am trying to open the pictures section and perhaps it is because I am new to this site but I am unable to find it. Can you help me out

Just purchased a 2006 380 Sundancer. I have not had it in the water yet so this is going to be a very long winter while it is put away in storage. I am considering my options for a davit system for a small hard bottom dingy. (8'6", 60"beam, total weight with motor 165 Lbs) I have looked at a...