had one of my power steering actuator seals fail and needed to be replaced. hard to tell from your picture but it looks like fluid has come out of the top of the monitor? if so that would be my first guess. if you replace one, do yourself a favor and replace both. i also had all of my hydraulic...
it does. ill take a look in there but im in that quite a bit because i keep cleaning supplies in there and its always been dry. haven't been in there for a week so its worth a look i suppose. really does seem to be more a turbo whistle though. but worth a look anyway .
ill give that a shot. my first thought was restricted air flow (air cleaners) or boost leak, maybe a clamp or hose.... ill get down there tonight for a quick ride just to see if its anything obvious if not i guess i will let the professionals deal with it.
Bilge is completely dry. no water at all. i am going to take it out for a ride tonight with a friend so i can go in the bilge while underway to see if its anything obvious.
So last night on my way home from dinner i am cruising at about 2600rpm. everything is fine. it was such a calm night, i increased my rpm's to about 2800-2900 and i get a high pitch whistle noise. i back the throttle down to 2600 again and it goes away. i tried this a couple times and kept...
I was there Tuesday night for a couple drinks. Thought I saw you post you’d be up there but didn’t see your boat. We are going back Friday late afternoon but you’ll probably be gone. Hope you had a good time.
im just going to post this here in case anyone else wants to replace theirs. I called Taylor made today and they carry the Q-lon stripping. it is part #41100607 and is $3.30 per foot, sold in 12 foot pieces.