Search results

  1. 2

    In Search of 268 Sundancer rear folding bench seat and hardware.

    Thanks, I know its a long shot but if someone has a rear folding bench or hardware they are not using I would be interested in obtaining it from you. I've know I can make my own, but a complete unit would be quicker and easier getting ready for boating season. I searched online and local boat...
  2. 2

    2987 268 Sundancer Windshield and Hatch Questions.

    Hi, I need a primer on the windshield and hatches on my 268 Sundancer. After a weekend of monsoons on the lake leading to all kinds of leaks around the hatches and windshield I need to start planning rehabs on the two. First, the leaks around the hatch appear to be due to a bad rubber gasket...
  3. 2

    Wanted - Marine spark arrestor, 7.4L Rochester carb

    Seemed to misplace mine after the rebuild. Mine has the dual breather hoses. I am planning on being on the water first week of July. Let me know what you have, Thanks!
  4. 2

    1987 268 sundancer 7.4L standard or reverse rotation from factory?

    Hi, just about to order a new motor and had a show stopper. How do I know my BBC is standard or reverse rotation? It is a single and when I replaced the distributor and spark plug wires last year I do believe it was standard BBC firing order. Without crawling up in the boat and having to undo...
  5. 2

    Need Help finding a few parts 268 Sundancer

    Hi, looking for some help finding a few parts on a 1987 268 Sundancer, I am sure the parts were used on other size boats also. First, are the air collector boxes under the rear side vent louvers. The other is the plastic cover that goes over the shift mechanism in the cockpit area, single...
  6. 2

    1988 268 Sundancer for parts

    I have a selection of 268 Sundancer parts now available. Here is what is not available: both side windows, arch, outdrive, windlass, pulpit, rear cabin cushsions, gauges, bennet tabs, stove, fridge, a/c, generator, bow rail. Let know what you may need and I will check and or post picks. I do...
  7. 2

    Hatch Sealant, Plexiglass to Aluminium.

    268 Sundancer, front hatch glass keeps popping out of frame. Tried both butle rubber sealant from Permatex and clear sealant from Liquid Nails. Neither has held more than a few months. Any ideas on what to use and where to get it? I heard DAP made the original sealant but cannot find it retail...
  8. 2

    268 Vent Boxes

    Anybody have a line on replacement aft vent boxes, mine are not good. The grills are fine just the cardboard or plastic air box needs replaced.
  9. 2

    Need a recomendation on a new battery charger.

    While pulling the guest battery charger off my 1988 268 donor boat I found out it was fried internally. Ii is a Guest 2520C 20 amp dual auto charger. Seeing that it is 25 plus years old and that model is not longer made, does anyone have a suggestion for a replacement. I checked all the...
  10. 2

    Let's Talk About 3M Finesse-it II

    I am currently at the polishing stage. I just finished with the 3m super duty rubbing compound. The boat was very heavy oxidized and the compound work great! Now I am at the next stage using the Finesse-it II, applying it with my Makita polisher with a synthetic pad. Now my question is... I seam...
  11. 2

    268 Sundancer wing window in cockpit replacement.

    The wing window needs to be moved and I quickly looked at it but could not decipher how to remove it for replacement. If anyone know how to remover it at the hinges please let me know Thanks!
Back
Top