Search results

Thanks for the help. I was hoping that someone has done this and maybe had some pictures so I could get ideas. Minn Kota sent me the schematic of their quick release bracket. I will see if the footprint will work on the limited space near the nav light. Might be a few days. Boat is now in...

Has anyone successfully mounted a bow mount trolling motor to the front of their 180BR? Looking for ideas and suggestions.

Lost the Canopy Top supports for my 180BR. I can make my own but need the measurement for the 7/8" tubing. To make the right length cut I need the distance from inside seat of endcap to open end of tube. These were used on 180BR models from 98-01. Many thanks in advance for the help. NOTE...

This is a fairly common part. It is called a Windshield Support Foot. Taylor makes the parts. I have found these sold separately. However, many places may only carry the Support Poles as a set. Taylor's part number for the 11" set is #1632. Check with your local boating supply store. They...

NOTE: This was previously posted incorrectly in another discussion board Hello Everyone! Back on Club Sea Ray after a 3+ year absence. Finally got back into boating and picked up nice 1998 Sea Ray 180BR. Unfortunately the support pole attachments for the canopy top are missing. These allow the...

Hello Everyone! Back on Club Sea Ray after a 3+ year absence. Finally got back into boating and picked up nice 1998 Sea Ray 180BR. Unfortunately the support pole attachments for the canopy top are missing. These allow the top frame to connect to the windshield frame. They are only about 12"...

Moonrise over Cayuga Lake on July 4th weekend. Cheapo camera, no idea about exposure or what that even means, shutter speed - huh?, aim and shoot. That's photography for us. Sometimes I even manage to get the heads of my subjects in the frame of the picture.

For me it is Armada / Camco 201 spray or Plexus spray. These are good because they are foaming action and lift the dirt instead of rubbing the dirt around on the clear vinyl. The more I use the stuff the better water and dirt wash off as well. Also works great on my glass windows too...

I sanded, primed, and painted my outdrive last spring as well. Because the Mercury Phantom Black paint is an enamel paint it is OK to recoat within the first hour while it is still tacky. Otherwise it is important to wait the week between coats because the enamel creates a shell finish...

EGGS-actly! They leave a mess under the swim platform. You have to scrub pretty hard to get the eggs off of the boat. My kids can't get over the size of these fish either - Huge and ugly! Fortunately they only bang on the boats for a few weeks in June. Then all is quiet again. Although...

Thanks for those links. However, I am really looking for an original HARD COPY of the 2001 Sport Cruiser brochure. I am hoping someone out there has an extra one that they would not mind parting with. :smt001

:smt100 Looking for a 2001 Sport Cruiser brochure for a relative with a 310 Sundancer. Anyone here have an extra hard copy that they wouldn't mind parting with?

Good job Chuck1! That is certainly quite a list.:smt038

Hi George, I spoke to you the other day on the telephone. Glad you joined CSR. Here are some ideas that I found. The last one is pretty cool. But I think one could be made for much less. http://www.shareaproject.com/pages/projectTut,p,393,00.html...

Hello Iain, The letters and numbers in your serial number all mean something. The first three SER is the designation for Sea Ray Boats The fourth letter indicates which plant built the boat. ie: R = Riverview, V = Tellico Lake, T = Knoxville, P = Palm Coast, Merrit Island and Sykes...

Try going to www.nadaguides.com to get a rough idea as well.

Congrats on your purchase!:smt038 Where in the Finger Lakes Region do you boat? We keep ours on Cayuga Lake at Allen Treman State Marine Park in Ithaca!

Indeed, as with most manufacturer's today, regardless of industry, cutbacks are the reality of the day. Your email request for information would have been forwarded to your nearest dealer. If anything, the dealer should have contacted you in some way, shape, or form in a timely manner. This...

What is referred to as a pump-out head is basically a porta-potti with a waste and vent line attached. aka MSD (Marine Sanitation Device) Your set up appears to be just that. Only it has been capped to use like a porta-pottie instead. Simply re-connect the lines and you have a pump-out...

That's just mean.