Search results

There isn't any "circuitry". It is 2 wires coming off a 24vdc connection that feeds the other backlit paneltronics in the same fashion. It is literally a small bulb inserted into the bottom of the acrylic.(Nothing fancy at all) I followed the wires to the source and it is the simplest wiring...

Thank you, much appreciated. I just found these, should be simpler. :)

The response from Paneltronics was simple: "This is no longer available". Yesterday I decided to remove it and take a look. It is a simple acrylic block, painted white on 5 sides and a white painted sticker on what would be the exterior face side. The bulb is TINY and inserted at the bottom via...

I took mine to a local powder coater and they came out perfect. They blast them to clean then prep and spray. The total cost for my 4 pieces was only $60.00. After that I took the actual chocks in and they powder coated them for $100.00. The local company was CRM. I am sure you could ship them...

Thanks, I just emailed them as I didn't see the part on their site. I always figure someone on CSR has dealt with this and would get a fast answer here. LOL Have a great day!!

Hello, I need to replace a burnt out led backlight on my AC distribution panel. Does anyone know a source for this repair or replacement? This is on a 2000 510 DA. Thank you

Another item off the "Honey-Do" list! Added an LED light in the storage locker in front of the galley sink.

Looks good. That is on my list for next season. I have all the Newmar switch covers already so I will just need the panel and whatever switches required to swap out. I did this on my 460 and yes, it was a PIA. I installed new backlighting this year with a neon light wire, it came out pretty sweet.

Cool things happen when I leave for a couple weeks! They are redoing the insert pieces and took one as a sample to match it perfectly. :)

I have all the measurements and angles from my 340 that I can pass along to you. It will just have to wait till I return from Tulum next week.

This would be a welcome addition for sure. "CAN J1939 and NMEA2000 interface for a direct connection to a modern instrument cockpit." To get the engine data to an MFD I used the products from Yacht Devices. These were simple to insert into the NMEA backbone or Raymarine's Sea Talk Ng. That...

Good Morning, I would think there may be but I do know the following: As of September 2022 I finally received the new EDC directly from Volvo. With all of the emails back and forth over the years and finally months leading up to my replacement, I was told the following. "After building the units...

24v

The only dual color I could find was white/red. https://barnegatlightmarine.com/product/courtesy-light-white/

Here is the link I used and ordered with the Blue led. The options are white, blue, red and white/red. https://barnegatlightmarine.com/product/courtesy-light-white/

Reach out to GHS Swim platforms, they have them.

Cool! Did you replace the bulbs in the mast to LED? If so, what are the bulb type/model #? What cockpit lights did you replace and with what brand/model?

1 step closer! Launch day is only 59 days away. Picked up the new bath & hand towels for the boat today. :cool:

For the chair: https://www.fisheriessupply.com/garelick-replacement-gas-springs/49-251 Strip light under the fwd. berth bunk and at the salon under cabinets. https://www.amazon.com/gp/product/B09YXQXH7B/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1 New overhead lights: I ordered from Ebay...

I do have all of those details on my home computer. I’m currently working in Hawaii for another 10 days and can get back to you at that time. If you’d like to private message me as well, that would be great.