Search results

  1. M

    Old Norcold Fridges

    I agree I was lucky, and I was concerned that the self piercing valve would leak. The R134 I used contains a leak stopper. I'm generally against using any product that says it will plug a leak, but in this case I figured I had nothing to lose Gary
  2. M

    Feedback on Norcold DE0061

    When we purchased our boat at the end of November and impossible to tell if the refrigerator was working. Well as it turns out like many Norcolds it didn't. I did all of the research finding out that they are very expensive to replace and sealed at the factory so they cant be recharged. Then I...
  3. M

    Old Norcold Fridges

    When we purchased our boat at the end of November and impossible to tell if the refrigerator was working.<br /><br />Well as it turns out like many Norcolds it didn't. I did all of the research finding out that they are very expensive to replace and sealed at the factory so they cant be...
  4. M

    SOS.. 911... um... help :)

    Your killing me! Gary
  5. M

    SOS.. 911... um... help :)

    Glad it worked out a can per hole is quite a bit more than I would have used. Make sure you change the oil, I'm sure a bunch of that starter fluid found it way past the pistons and into to crank case Gary
  6. M

    SOS.. 911... um... help :)

    ok let's start fresh making sure the systems are correct 1) Use Vice grips or a clamp and clamp off fuel supply to the engine. Crank the engine to remove any remaining fuel from the carb. 2) change the rotor and the cap, 3) Change spark plugs with the spark plugs out spray a shot of...
  7. M

    SOS.. 911... um... help :)

    I'm having a little trouble understanding why the engine won't any signs of firing. If you have spark, fuel and air it should do something, even if it were a timing chain. Gary
  8. M

    SOS.. 911... um... help :)

    Did you try starting fluid? If you get a pop from that then it is probably a fuel issue Gary
  9. M

    Help

    Sometimes yes, sometimes no, when you turn the wheel it changes the stress on the bearings changing the sound Gary
  10. M

    Help

    If the sound changes when you turn the wheel then it is probably the gimbal bearing Gary
  11. M

    Mercruiser 260 - What's the trick for changing plugs?

    I always did it with the rubber insert removed from the spark plug socket. It will give you a little more wiggle room. Gary
  12. M

    Cruisair touch pad going nuts

    I Had the same issue With the breaker off unscrew the panel from the wall and gently remove the plug from the back. Clean the connection, put it all back together. It has worked for me. Gary
  13. M

    Any Recommendations for a Cockpit TV?

    I find that the screens with a matte finish are much easier to see above deck. No glare or reflection Gary
  14. M

    Buy a slip first and boat later?

    Buy the slip even if you don't get a boat! At $2400 per year income rented out, its a great investment 8.2 percent interest on the $29k slip Gary
  15. M

    What is a vessel goes before the Supreme Court

    Only if someone is riding on your back and using you for transportation Gary
  16. M

    Purchasing property in Florida

    Friends of ours just purchased a 3 bedroom house on a nice piece of property with a built in pool close to the beach for $95k and it was built in 2004. I think you should look around there are much better deals to be had Gary
  17. M

    Replacing the refrigerator?

    Can we see some pics? I'm also curious what make and modem you purchased, everyone I have seen requires 5 inches of space on the sides and the back. Thanks Gary
Back
Top