Search results

who did you send your govnor out for rebuild? Mine is slowly leaking oil.

Opened the boat up this past weekend was looking around found rotten wood above the transom. The transom itself is fine was just wondering if I am in big trouble. It doesn’t look like anything structural. The only thing attached to it is my fire extinguisher system. The rain water would run...

Wont let me upload pictures says file exceeds

Opened the boat up this past weekend was looking around found rotten wood above the transom. The transom itself is fine was just wondering if I am in big trouble. It doesn’t look like anything structural. The only thing attached to it is my fire extinguisher system. The rain water would run...

Sand White is what I used

Do you do this same process when boat is winterized on the water. Probably be the same process for block and manifolds but what about the drives in my case previous owner pulled inlet water hose to stern drive empties all water in hoses then attached hose back together poured gallon A/F from T...

No one out there winterizes on the water?

I Zip Tie my Water Inlet hose from stern drive up to my risers keeping above water line after winterization has been completed and when spring comes I put back on.

Do you do this same process when boat is winterized on the water. Probably be the same process for block and manifolds but what about the drives in my case previous owner pulled inlet water hose to stern drive empties all water in hoses then attached hose back together poured gallon A/F from T...

I have a 30' 1987 Sea Ray Sundancer that I have recently purchased. Its equipped with Twin Mercruiser Alpha One 260/V8's Thunderbolt Ignition with Alpha One Gen One Drives.. Have always done my own winterizing with previous boats but the boat is to wide and big to trailer. The boat has Recently...

"checkballs", you simply tighten the little lock nut(s) all the way down, untilthere's no more threads..........in other words, you bottom-out the nuts.There's no "setting" or "calibration" for theballs.....they're only to provide a slight back pressure to the "extra"flow from the drive, so the...

I have a 30' 1987 Sea Ray Sundancer that I have recently purchased. Its equipped with Twin Mercruiser Alpha One 260/V8's Thunderbolt Ignition with Alpha One Gen One Drives.. Have always done my own winterizing with previous boats but the boat is to wide and big to trailer. The boat has Recently...