Search results

Quick update. The secret was to remove the storage console/cup holder panel to the starboard of the captain seat (4 screws and caulked on). The conduit provided for future cable pulls from the engine compartment dead ended in that area. There is NO way i would have been able to pull thru to the...

Thanks everyone. i will give that a try.

Hi Can anyone share knowledge about pulling a new transducer cable from the bilge to the dashboard? My DSM and GPS regularly throw alarms on my Raymarine E120 on our 2006 SR Sundancer 40. I am starting an upgrade to modern electronics. I contact SR Tech Support. They told me to look for the...

We have a 2006 Sundancer 40. We purchased it in Nov 2010. Was too busy with other things last boating season to deal with this. The Salon AC fan is too loud. It is a 4 speed fan and the slower the RPM, the louder it gets. I called Cruisair and a phone technician told me that that particular fan...

I've learned the Cruisair control box is located behind the Salon main electrical distribution panel. You remove the (2) screws and the panel swings forward. The panel is hinged on the bottom. The "trigger" consists of a relay and capacitor soldered to a 2 led green circuit board. You can find...

I am looking for advice where the control box is located holding the 3 cruisair trigger switches on my 2006 Sundancer 40. The front state room AC won't activate the water pump relay. I did a search at the forum and found a thread which indicates this control box is behind the main distribution...