I went to 20P props with my 1994 290 Sundancer. It's a single engine 454, its brand new last year. We were having a hard time getting it to come up out of the hole with four adults, full freshwater and full gas tank. It would take close to 45 seconds to plane out. Top speed was good once it...
This prop is from my old bayliner. It had an Alpha One drive with this prop on it. It's in need of some polishing, but is not bent or damaged. It's a 19P 5-blade prop. I would like to get 200 for it. They go for 500+ new. I have picture upon request.
I have two stainless steel props. I pulled them off my single engine Sundancer 290 because the wholeshot was way to bad. I would like to get 750.00 for them. I am in North Texas. I can provide pictures. They are flawless.
Well I am trying to upload pictures however it won't let me upload them. I took some six inch PVC pipe and and made them fit over the old holes so I could use any size speaker. E-mail me and I will send you some pictures of my changes.
We've spent most of the summer on it now, and it's been alot of fun. Our lake is really starting to get low so it cuts into the time we can spend out there. My speeds are pretty much what I said. I can hit WOT at 4400-4600 RPM. I assume that's pretty close to redline so I back off about 20...
Thanks’ I did some research on the steering wheel. It's about a 300 dollar steering wheel. Made by ISOLLA. Mine is the ZULAG. It was already on the boat when we bought it.
So since my last post...
1. Replaced the compressor unit on the Norcold fridge. Works great now.
2. Replace...
We got our boat in May, after having new Jasper engine put in. We've had 0 problems with the engine since picking it up. I did change my props out to 20 pitch to help my hole shot and get up on a plane with a full load better. Still get's up to about 32 at around 4200rpm. It will go up to...
I am not sure how different mine is.. I have a 1994 290.. Single 7.4 with a Bravo III 23P Top speed is about 33-35 with just my wife and me. Full tank of gas and full water. I do have the Gen. I think it planes up around 25-28. I have some 21 pitch props I am going swap out. When I have...
If these are for sale I need at lest the left one.. I will buy both to have a backup. I assume these are the same as the ones on my 1994 Sundancer 290...
Toilet is fixed.. Primed the thing and now it works well. Fridge is toast I think... I can't find anyone locally that can come look at it. I am too far. Anyone know the part number for the compressor? DE0051 Norcold fridge.
So, good news your right I found the plastic filter and is was totaly clogged up. Cleaned it, ran the tank empty.. Cleaned and re-filled. I did this about 3 times. Then I treated it and it works great. Hot water is better than my hot water at home! :) Solved another problem.. Looks like...
So we had the boat delivered today. I watched the guy with a 40ft gooseneck trailer and a Chevy 3500 load this thing in like nothin.. No major problems.. Not sure if the norcold fridge is working right. I left it on-overnight to see if that makes it work. I hear it running. also I "think"...
Well I found a 1969 F-250 restored.. but I know it won't do the job... Anyone near texas selling something cheap? Yeah I don't know how fast she will go yet. We are putting her into the water tomorrow! :) I added LED lights on the back of the transom. I will upload some pictures.
I assume it's the 1979 overnighter? 1000 dollars to rebuild the engine is not bad if they do a good job. Bottom paint is about 400-700 bucks. I am not sure what the value on this boat is in good condition. I would be careful how much you put into it if your not planning keeping it a long...
Not sure where that is in relation to Grandpappys. I went up to Grandpappys and signed on the lease today. The parts for the boat won't be in until friday. It's not going to be ready for this weekend I am sure. :( I did go up and see it today and they had just finished buffing it out. It...