Search results

  1. A

    Late 90's 270 Sundancer Thread

    Great Lakes Canvas. They say they cant guarantee fit. I took the chance and the fit was fine.
  2. A

    Late 90's 270 Sundancer Thread

    mine had 4 black screws holding the back piece where CD changer and radio are mounted. I removed them and pulled them out. YourS is prob pressure fit if no screws but that’s where the little amp is. Don’t mess around anywhere else.
  3. A

    Late 90's 270 Sundancer Thread

    Ram mounts look terrible in my opinion. Here’s one I saw awhile ago from a listing. I also have a raymarine a68 built in will upload later
  4. A

    Late 90's 270 Sundancer Thread

    sorry yes. 17.5 is at 3800 rpm going 28 mph What Mph are you doing at 3500...?
  5. A

    Late 90's 270 Sundancer Thread

    Does anyone out there have a DA with a 496... curious as to their setup and cruise speeds...
  6. A

    Late 90's 270 Sundancer Thread

    I have a 2001 DA with a replaced motor as well to 496 non HO. Had the drive replaced as well to a 2.2 from a 2.0. Here are the numbers: 1) 496 with 22p 3x3 blades 2.0 drive: WOT = 39mph at 4800 2) 496 with 24p 4x3 blades 2.2 drive: WOT = 38mph at 4800 1. was done with analog gauges and gps 2...
  7. A

    Late 90's 270 Sundancer Thread

    Camper definitely. I’m in Toronto. Helps with the shoulder seasons and rainy days as well as insects. I bought my frames and all directly from Great Lakes. Mine is an AZ boat and they fit perfectly. Captains Navy.
  8. A

    2000 270 Sundancer (Arizona built) canvas replacement?

    Sorry for the late reply. Thought i had email notifiaction for responses. Correct my boat is an AZ boat. I bought the canvas and frame from great lakes directly for a TN built boat. Fit perfectly. Not mods required. Looking backing im sure i couldve used my old frame. Yes the canvas is...
  9. A

    Bravo 3 Prop Direction

    Thanks im pulling her out this week and will the 26p props again. If the 26p props work i’ll have a set of 24’s for sale
  10. A

    Bravo 3 Prop Direction

    Silly question here, I just replaced my 26p props 3x3 blade props with 24p 4x3 blades. But now I am having major trouble getting on plane and the engine really struggles - I don't even try to go past 2600 rpm as the speed is only 10mph. I'm wondering if the mechanic installed the props...
  11. A

    2000 270 Sundancer (Arizona built) canvas replacement?

    I know its an old thread but want to be helpful. I to was in the same predicament. My 2001 is an AZ boat and thus was told by Great Lakes Boat Tops they cannot guarantee fit nor would they replace if it didn't fit. I took the chance during a 25% off deal and ordered the entire frame and canvas...
Back
Top