Started my boat today and all gauges are down. No gauges on the instument panel are working, smart craft reads "no tach found." Engines start up with no problem. Everything was working perfectly last week. Any help would be appreciated.:smt100
Problem was hose leading into the water pump was clogged with small bonicles and shells. Flushed out and she's running fine. THANKS to those who replied.
I had a low h2o psi alarm go off on my boat. 2005 sundancer with 5.0 bravo III. water pressure sensors were replaced last year. actually switch sensors around from port to starboard but still had low water pressure. Any thought on what the problem is. Also,s thinking it may be a impeller...
have an alarm sounding on 300 sundancer. Alarm sounds an a 0 shows in display also shows a boat with arrows pointing up an down. Is this showing a problem with the outdrive trim. Any input would help.
Wonder if someone can help. My port engine oil suddenly started to turn dark and last trip 2 hours out and 2 hours back burned about a quart of oil. Starboard engine color and level are fine. My boat is a 2005 Sundancer 300 engines are mercruisers 5.0. Thanks.
Wonder if some can help. My port engine oil suddenly started to turn dark and last trip 2 hours out and 2 hours back burned about a quart of oil. Starboard engine color and level are fine. My boat is a 2005 Sundancer 300 engines are mercruisers 5.0. Thanks.
The float switch in the shower sump went, but I can't find the exact replacement for the rule-a-matic. The old one has mercury in it and I think this is why it is not made anymore. But the replacement is bigger than the old and won't fit into the premolded screw holes of the sump box. Anyone...