I can second on the pads from Chris. I replaced my port last year and even though my starboard side works great will be replacing it next weekend. If anyone is interested it is available.
forward hatch over berth I have two new arms but the plastic piece arm attaches to on hatch frame is broken. Does anyone know where to find this? I thought I saw this in the forum but can not find it.
Thanks, I have seen that post.... Not sure if I can put it off until they have the 340 style created and was hoping for a quick replacement option(someone having a used one)
Last ditch effort to find a used port switch pad for my 340. Same pad for 280,300, and 340. I have a trip coming in mid July and either find a used one or have to order from FP and get the job done prior to the trip. I know if I buy a used pad I will probably eventually have to do the FP install...
New England Boat show is ON! https://www.newenglandboatshow.com/ Hoping to see some venders, understanding inventory issues I am still hoping with so many canceled that they will show up.
Thanks for the reply, I was thinking 22# but I like the idea of the 33#. I will have to look at the specs on the windless for capabilities. I will mark the chain and just ordered the stainless hull guard. I am heading to the Boston Boat show in a few weeks and hoping I can score on reasonably...
Delta Fastset plow style anchor SS, Has anyone replaced with? I have read the forum and understand some have had issues with replacements hitting the hull upon bringing it up. My anchor is bent and I would like to order one over the winter for spring...
Brand new 340 owner!!!! Looks like I will be jumping from the 300 forum to here. Wife and I drove to VT for survey, stayed our first night on it(no pillows:() and had it hauled to Henderson the next day. We did spend some time on Champlain the evening, great area for boating! If CA is closed...
I am looking to order a replacement arm and assembly for the windless on my 2002 300. This is the only picture I have and the boat is a few hours away, does anyone have an idea as to the make of the windless Sea Ray used on the 2002?
Hatch is done and no pictures.... sorry. Window came out way easier than I thought. Cleaned it up and reinstalled with 4200. Did use the painters tape and saved me having a mess to deal with. The aft end of the hatch hinges I had to really work at getting the tape out. I thought when I pulled...
I was up to the boat this past weekend and decided to leave it wrapped until I have the materials and time to hit the same hatch. I know I have some rot on upper left side as I have one screw that wont hold/tighten. Ones close to it all good so I am catching it early but want to get all rot out...
I removed mine on my 90 250da and had most of it rebuilt and put new vinyl on it. I don't have any pictures but was not to bad of a job from what I can remember. After taking the pull out seats out(held in with straps screwed in) you can get to the hardware to remove the seat.
An entire thread of very little information from results. Was hoping since some time has gone by to find some experienced results to date. I believe over four pages we had one user give feedback on the product.