Search results

I boat in Lake Erie and keep the boat in the water all spring and summer. My boat (new to me) does not have anodes on the trim tabs. What kind of anode should be on the tab (Mag, Aluminum?). I thank you for any guidance that you may give. Thanks Yako

Is there a thread for the 300 Sundancer from the mid 1990's? Would love to see what people have done with their boats.

I am looking at buying a 300 Sundancer from 1994. This had both engines replaced the 220 Hp engines were replaced with 260 hp (5.7Lengines). When I tested the boat, I was able to get to WOT of 4200 - 4300 not the 4600 as speced. If the HP was increased and the pros stayed the same (origimnal...

I am going to purchase a 300 Sundancer form 1994. There is hole in the dash that had some old navigation equipment. It was taken out by the previous owner and he patched it with a piece of laminated wood. Anyone have any thoughts on how to fix this with the wite dash material .... or..... anyone...

I have a 1995 270. In the bilge, on the port side, there is a set of breakers for the sump and bilge pumps. The breakers are small red buttone. My question is this.... Is there a way to manually trip these breakers. I had a sump that was stuck running and wanted to turn it off in order to...

I have a 1995 270 Sundancer with the folding back bench. One of the legs has broken. I am having a difficult time finding replacement parts. I saw some folding legs on the internet. Has anyone used these to repair? Or has anyone used other solutions?

Can anyone tell me what the capacity plate is supposed to read on this boat. I purchased a used boat and can not find the plate. I will put one in, but need to know what it should read.

I have a 1995 Sundancer and want to pull an inner tube. I do not have a tow ring on it. Does anyone have experience in installing a tow ring? If so, how did it work, how did you reinforce and where did you position it?

I am looking at purchasing either a 1998 270 SE or a 1995 270. Both have portable heads. Both have holding tanks. Is it possible to install a vacuflush head on these boats?

I am upgrading to a 27 foot sundancer. I am getting "help" from people who recommend twin engines for the redundancy, and better maneuverability. Others tell me that the singe is better because you do not have "two of everything". I am buying used and I see way more singles than doubles...

I am thinking of upgrading from a 21 foot cuddy to a 270 Sundancer. In the 90's there Sundancers with an 8'6" beam and a 9'2" beam. This boat would be used on Lake Erie and I am wondering how well the 8'6" beam in a 270 would do on the lake in the typical chop that we get. If anyone has any...