Search results

Light Algae (say 3-4 months or so worth on a Texas freshwater lake) on the bottom of my boat (painted bottom) will cause enough drag to bring my 4500 rpm WOT range down to about 3600 rpms or so. It's amazing when I run it after a high power spray of the bottom (friend has a lift which I borrow...

Originally, my problem is as you described. So I also pumped out the water, cleaned all the compartments (because the water did rise high enough to transfer into the compartment with the fresh water pump and then underneath the fresh water tank). I then let it all dry for weeks (prior to my...

I need some help uncovering an unknown water source. When I removed one of the two tiny screws holding my shower sump box (under the aft berth) a reddish brown smelly water came up through one of the holes. Does anyone have any idea how water could get below this self contained bilge area? I...

I posted this on the older 290 thread but thought it might work here, too. Does anyone know what type of paint SeaRay used to paint the bildge areas under the back berth (and most of the rest of the "un-seen" inside). My boat is a 1995 290 Sundancer. Here's a picture of the area I'd like to...

Does anyone know what type of paint SeaRay used to paint the bildge areas under the back berth (and most of the rest of the "un-seen" inside). My boat is a 1995 290 Sundancer. Here's a picture of the area I'd like to touch up. It's currently a grey putty color which I would just like to match. I...

I hope someone on this thread can help. I just purchased my first SR 290 Sundancer this past spring. I am replacing the shower sump pump because the fitting on the side of the plastic tank is broken and it leaks. The new Attwood sump pump box I purchased is slightly different in size that the...