My hatch jammed and when I tried to close it, a roller wheel came off. I obviously need to pull the hatch off to replace the wheel, but have no idea how to do it. I think I need to remove the port side track and lift the whole hatch off at an angle, but I can't get to all of the track screws...
Yesterday, for the first time in 5 years, my windshield wipers just started on their own...twice in an hour. I hadn't had them on recently, nor did I touch any other switches. Just cruising along at 10 knots and they came on for a couple swipes, then went back off. Anyone have this happen...
I have a 2005 390DA and the freezer is dead. I cannot find a recent thread on the RPF50, nor can I find a replacement after many hours of research.
17.5" W x 20.5" H x 21.12" D
Does anyone have any leads?
Sent from my iPhone using Tapatalk
I have a 2005 390DA now and am looking to upgrade to a 2010-2015 450DA
I have the QSB 380 with V drives and want Zeus. Can any owners share pros and cons between years, Zeus issues, must have options, etc.
thanks!!
Sent from my iPhone using Tapatalk
I bought this transducer by mistake. It's never been used. It has a 10' cord with black, purple, blue, white and bare leads.
$250 new
$75 including shipping
George
Too many times folks complain about services or products, but I have to share a GREAT experience that I had with Boat US Graphics.
I decided to change my hailing port graphic. I got online on the Boat US Graphics website and easily designed my desired graphic. The price was reasonable and the...
As I plan my upcoming run in mid-Sep with my 390DA (diesels) from IL to Ft Myers, I'm at a quandary as to how to run the last couple of days. Originally, I was planning to make the looper run from Carrabelle to Tarpon Springs, then take the ICW from there to Ft Myers. However, after much...
Does anyone know where the thru-hull depth transducer connects on a 2005 390 DA with Cummins, electric ZF transmissions and DTS throttles. I found a Cummins reference to the depth transducer connecting to the engine harnesses. Helllllppppp
I need inputs from others who may have been in a similar position as I find myself-I realize that much of this is rhetorical.
Background: My wife and I are 49yr old diehard Sea Ray owners-no kids. 176SX-220SD-330DA-390DA in 7 years.
I bought the 390 one year ago to be my last boat. I...
My boat has been sitting in the river without much movement for the last three weeks and when I went to take it out today the depth gauge showed nothing but –-- I pulled the transducer out and cleaned off the crud, but still nothing. Other than pulling it out and listening for clicks does...
I have a 2005 390DA and the 1/2 sensor apparently doesn't indicate. I called the manufacturer and I was told that the individual sensors can be removed. How should I remove them, clean them and reinstall them. Thanks!
If you have deteriorating backing like me you're pretty upset when you have to replace your carpet after two years. I own a polyurea company and have developed a procedure that allows me to spray the carpet backing sealing in the crumbs and giving your carpet another 5+ years of life. My 390DA...
My Starboard Trans had been acting up in reverse. Whenever it was up to temp,it wouldn't always provide reverse thrust unless I increased rpms. Last night, I just got up on plane with engine sync on when the boat settled back down like I had chopped power. I pulled the throttle back and then I...
I have a small leak on my Starboard WS washer outlet. I believe that it gets water from the fresh water system. The problem is that it continues to run a small stream that leaves a brown stain on the fiberglass. Have any of you had this problem? If so, what did you do to fix it?
I'm bringing my newly purchased 390DA UP from Ky Lake to Peoria the second week of March (weather/ flooding permitted). I've planned a 3 day and a 4 day COA. I have a concern about getting fuel in Cape Girardeau, MO though. Any recommendations, gotchas, go-see's, DON'T DO THIS's or any colorful...
My '05 390DA seems to be missing the sunpad adjustable backrest frame. I've looked in the parts manual, but I don't see it broken out. Could someone send me a pic or describe it, so that I may contact the previous owner to request it. I'm guessing it's stainless, but it might be aluminum or...
I want to add a Camper Canvas to my "new" 390DA, but I can't find anyone that makes it. I've been given a $1900 quote for the top (including 1"x .065 SS tubing) and $4650 for the 9 panels of enclosures (2 screens at stern). And this was using standard Sunbrella and 40 mil clear vinyl...