Need to transport a 39 aft cabin from Long Island sound to the upper Chesapeake bay. Trying to decide weather to have it trucked if thats possible on run it down. Has anyone have any experience doing this?
After checking, my 12 volt system has me confused. My batteries go down in just a few hours when on the hook. I replaced both house batteries and had the same problem. Figuring I had something pulling the system down, I stated checking amp drain with a DC amp clamp. What I found is that the...
After checking my 12 volt system has me confused. My batteries go down in just a few hours when on the hook. I replaced both house batteries and had the same problem. Figuring I had something pulling the system down, I stated checking amp drain with a DC amp clamp. What I found is that the...
I am going to replace the original upholstery glued to the hull of my 350 with foam backed vinyl starting this weekend. I was looking at 3M's #77 and their super high strength. Loctite also makes a spray. 3M also makes a water base brush on. Does anyone have a suggestion?
I have a 91 350 with a helm seat that adjusts forward and back only. The way I drive I would like more height. I se a boat cushion or other cushions but I am going to build something that flips up. I have seen a lot of newer boats where the front part of the cushion flips up. Has anyone tried...
I have been having Tach problems all summer. In short, The starboard tach was the most stable. Port tach would bounce around for awhile than settle down. The synchronizer would show the engines in sync with the port tach at 200 to 400 rpm behind. As I would speed up the port tach would lag...
It is time t replace the tachs and Synchronizer on my 350. The gauges are different every-time out. This weekend at WOT both engines were at the same RPM (for a change) and the Synchronizer was pegged to Starboard. The factory gauges are no longer available. Does anyone have any suggestions?
I have had trouble with my house batteries on my 350 the last couple times out. This weekend they went in just a few hours and took a very long time to come back with the generator. I checked the charger output and at each battery and got 13.02 volts. According to the punch out the batteries are...
I am having a problem with water flow for the AC units. I started both AC units this weekend and had no water flow. I had replaced the hose from the sea cock to the strainer and to the pump. I primed the pump and strainer and got minimal flow out of the aft unit only. I replaced the impeller but...
The 350 sundancer used a non mounted table base in it's galley. Not sure what other models may have used a non mounted table. I am looking for the base but will consider the complete table if I can find one. Thanks!
Time to upgrade my electronics. Planing on going with the Garmin 740. I also need to install a sounder I only use the sounder for depth not for finding fish. Is there any advantage to going with the built in sounder or a stand alone unit?
I think it is time to get a Official thread started for the 350. Reading the other official threads are helpful but let's have our own. I understand the 350 became a 370 in 92.
My new winter cover was delivered and installed today. Custom made and a great fit. Frank Fisher delivered it when scheduled, stayed and helped me install. The quality and workmanship are excellent. What a great company to work with.
I am in the process of buying a 1991 350 Sundancer. Engines were checked today, survey and sea trial monday. Boat is and has been out of the water for awhile. In the cabin there is a storage compartment in the floor with a clear drain box with a bilge pump in it. I think this is the 'grey water'...