The Vadney clips will work with the deep track, if you have the shallow track someone does make a similar product without going custom. When I had my canvas redone last year the shop that did it used a white clip to fit into the groove of the windshield, no drilling required. I have yet to find...
Reset the gauge back to stock and only calibrate if it is off. Mine has been pretty accurate right out of the box with no need to mess with the calibration. I did get into that menu once and changed it by mistake and ended up with results like you stated. Best thing I did was reset back to...
Andy-
This is one of the pet peeves that I have had with the mechanical steering, my steering is pretty stiff as well, have yet to take it apart but my guess is the end result would be similar to yours. Not sure if it is possible to grease the rudder shafts or something to try and make it a...
North Bay Marina
127 Marina Drive
La Crosse WI
http://goo.gl/maps/DZUmK
Somehow we were in 2 places at once...Marina view is from this year and cove view is from last season.
http://goo.gl/maps/WWCec
I have heard that their selection is starting to get limited, I was looking to replace mine and they don't even offer it anymore. http://www.taylormarine.com/fastback/chart.html But as suggested above, I would give them a call to see. I know one of my dock mates did get one for his 2006 320 a...
Thanks for the input, I told them to put them back to the stock specs and will go from there and see how it performs. They have never been scanned before and am anxious to see how they turn out.
Quick question for the fellow 370 owners, I am having the props scanned and checked, anyone know if they have deviated from the "stock" spec? For the 1995 it is a 18x21. My props were in pretty bad shape and the average was 20.8, and max rpm was about 4200, would you put it back to 21 or drop...
Congrats on the new boat! I would love to boat on the Great Lakes sometime, but the good old Mississippi is in the backyard and offers lots of miles of travel as well. I do not know how I would handle having the boat 5 hours away...
Russ-
Did you add more amps to the system, and if so did you put them all in the stock location? I was looking at all the same locations for speakers that you did, including the 2nd sub. Looks great!
Bill-
I used Sony equipment for the replacement, new head unit and wired remote at the helm. You should be able to replace the head unit fairly easy, on my boat the cabin speakers were driven by the deck, and the cockpit speakers were hooked up to an amp with rca cords, plug and play there...
I did the Sony 50 series, makes things alot easier than my old Clarion equipment. You can add a Sony changer with the Unilink control cables, you can also add more inputs, HD Radio tuners, etc, build the system with what you need. That was one of the reasons why I went with the Sony product.
When I switched out my system last year, the helm remote cable ran through a conduit all the way back to the head unit, attached the new cable to the old and pulled it through all at once. It was a simple procedure. It took me longer to decide to drill through the dash to make the hole bigger...
I have been using XBMC for a couple of months and I really like how you can customize the interface and plugins. I have been ripping the DVD's to ISO files so they retain all the menus and extras. You just need to have the storage to handle all of the content. XBMC does have some methods for...