Search results

PJ Tandem Axle Tear Drop Aluminum Fender 9x72 - 15" Wheels My buddy smashed the fender on his trailer - We want to replace both with aluminum but need the back on it. I can use 68"-72" 9"-10" wide. They want as much to ship these as the fender costs. I can find them on ebay for $260.00/pr...

http://thumbnet.net/wire/headlines/06013_Huron_County_Sheriffs_deputies_looking_for_culprits_that_destroyed_boat_in_Port_Austin_Twp_054740.php I'm thinking he was on someones fishing spot or the ex came back with her new boyfriend....

Couple quick questions. What is the length of the v-berth mattress? What is the length and width of the mid cabin area when converted to sleeping? I tried on the 320DA thread but no action. Thanks.

I currently have a single BIII on my 25' boat. I am looking to go bigger and a lot of them have twin V-drives - Where I dock is pretty tight with fingers for 2 boats along every dock.(see below link) How maneuverable are the boats with twin V's? Is there a big learning curve going from I/O...

My kid is in a robotics class and we are building a robot for FIRST competition - I am looking for a fairly compact way to reach up 72" and either place a hook to winch up or use to lift the 120lb robot 30" off the ground. We need to accomplish this in 20 seconds. I would like to keep the...

Not exactly sure where to post this so feel free to move if necessary. I am looking for a 30,000 BTU vent free wall mounted natural gas heater for my garage. My wants are a thermostat and a blower (preferably thermostatically controlled) I would just like to be able to set the thermostat on...

Anyplace to dock & eat in Tawas? We went over there this summer and wanted to eat someplace, Just ended up walking downtown from the state docks. Just curious if there is a decent place to eat with a dock. I boat out of Caseville Mi. and we have 100 miles of shoreline with zero places to dock & eat.

http://www.freep.com/story/news/local/michigan/macomb/2015/09/09/missing-macomb-boat-lake-huron/71947898/ http://www.mlive.com/news/saginaw/index.ssf/2015/09/missing_mans_boat_found_intent.html In the second link where it is floating - Newer 310 with the forward facing arch - Curious if anyone...

We have a festival in a near by town and they have cardboard boat races at the beach. The beach has two markers on each end of it and then markers out in the water that say swim area. Event starts at 4:00 and we got there about noon as we wanted to make some burgers on the grill and have a...

Every General Lee jump - I was 10 when this show came on and grew up with it. Man this thing gets some air on a few of these. Wonder how many spinal compression's there were with the stunt guys. I notice most of the big jumps result in saggy quarter panels. BTW if the battle flag offends you...

97 5.7EFI / BIII - Took the boat out the first time this season (don't ask) and I am watching the temp gauge - It never moved. I stopped the boat and felt everything and it seemed normal, Not hot so I figured the t-stat was stuck open. I pulled it out today and it was closed so I figured I would...

Looking to touch up some areas on my 97 250DA - Anyone come across something that matches the factory grey color? Everything is staying in place and just have minor touch up to do. Thanks

I have a 97 EFI 5.7 Mercruiser and am wondering if the spark plug wires, cap & rotor are marine specific. I like Napa Belden wires and just wanted to check beforehand.

There is a very stiff lower hose and a regular upper hose - What one is the input?

Congrats on your 2nd place finish in the Can to Can. http://thumbnet.net/wire/headlines/01966_CAN_2_CAN_IN_HARBOR_BEACH_SATURDAY_HAD_RECORD_NUMBER_OF_BOATS_SET_OUT_124148.php

They are for a BIII - How exactly do they work? Pros/Cons?

Is there storage under the helm seat and the aft facing seat? If so, what are the sizes of the openings and the depth? What is the headroom height under the arch? Thanks.

Kicking around a project boat idea. boat arch and windshield / frame were destroyed. how hard are these to find replacements for? I would think there are some Sandy boats around but not sure where to look.

My current boat has a vaccuflush and we really like it. I have been looking around at other boats and some have the head with rhe T handle beside the seat. what is this style called and how does it work?

I am looking at a 99 Dancer and the guy says it has twin 5.7 carbed engines with alpha drives. I have a spec sheet for a 98 and there is not a carbed engine listed. I went to the SR archives and could not navigate it well (that's another story) so i figured I would ask here.