Search results

  1. D

    Getting ice maker ready for storage

    This is what I do, I disconnect the water supply from the ice maker, let it run till no more ice is made, shut power off, defrost, wipe it down and leave the door open. I store my boat out side and never had any issue with mold. Dave
  2. D

    mold cleaning

    There is a product called "Mold Armor" it works well I've used it on the head liner in my boat and took it right off just follow directions and no issue. we bought it at The Home Depot I think. Good luck Dave
  3. D

    Fridge Removal...

    there might be plastic caps covering the screws on the face where the door seal touches just pop the caps and the screws are under the caps. Dave
  4. D

    Bypassing Hot Water Heater

    I see your point with the subzero, my ice maker is a stand alone witch makes it a lot easier. I also by pass the hot water tank then blow out all the fresh water lines with air and leave all the faucets open but I do add pink to the fresh water pump. Dave
  5. D

    Bypassing Hot Water Heater

    Running Pink through the ice maker ???? what does an ice maker do it makes ice. disconnect water line from ice maker, let it run till it doesn't make ice any more, defrost and done as per owners manual of my ice maker. Dave
  6. D

    Looking for Quicksilver generator parts

    I just bought heat exchanger parts for my Quicksilver gen. from these guys last spring. some parts are not cheep and getting harder to find. Most stuff in stock. http://www.partsfortechs.com/asapcart/generator-parts-generac-c-14_67.html Good luck, Dave
  7. D

    Vacuflush

    The pressure sensor switch has a cores thread and a big fat O-Ring on it, mine backed off once and caused cycling of the pump I just tightened it back up and it was fine. I too have replaced duck bills more often that bowl seal. Dave
  8. D

    Windshield vent motor

    I replaced mine about five years ago and bought it from McMaster Carr, it is the same exact thing as OEM and it even came with a quick disconnect plug kit, I think it was around $200.00 Dave
  9. D

    1990 350 header lighting access????

    Are they the round recessed lights with a chrome ring? if they are just rotate the chrome ring counter clockwise and they should come off. Pictures would help to see what kind you have. Hope this helps. Dave
  10. D

    swim platform transplant. GREAT.

    Yes, please post some pictures. I have a 1990 350 EC that I would love to do that to. I would like to see how you attached and supported everything. or e-mail dhjarry@gmail.com Dave
  11. D

    TV antenna reviews ??

    A friend of mine baught a flat digital TV antenna from radio shack he made a pocket on the inside of his biminy and just stuck it in there ran the wire down the bow to the TV he says it works great. He doesn't have an arch either. Dave
  12. D

    New to me boat 1990 Sea Ray 350 Express

    I've had my 1990 350 EC for 13 years now and have no intentions of giving it up it is a great boat we love it. Good luck with it. dave
  13. D

    Bottom Paint Suggestions

    Well I went with the Pettit Hydracoat, WM had it on the shelf so that made it easier. I hope I made the right choise I'll post on how it went on and in tha fall I report on how good or bad it worked for my conditions. Thanks for all the replys and good info. I still am going to keep an eye on...
  14. D

    Bottom Paint Suggestions

    Wow, thanks for all the good info. I think I have narrowed down my choices to Hydracoat and Supershipbottom. Amazon.com sells Hydracoat probibly cheaper than WM and I'll call Supershipbottom for pricing also. I'll post my decision. Thanks again, Dave
  15. D

    Bottom Paint Suggestions

    I contacted Pettit just to see what they would say and they suggested using pettit hydrocoat. any body have any comments on that? Thanks Dave
  16. D

    Bottom Paint Suggestions

    I've been using an ablative bottom paint same brand for 15 years (New England Paint Made in Rhode Island) and it has worked fine when I was in a marina with deep cool water and boats on both sides for shade. Now I'm on a private dock warmer shallow water and no boats for shade my starboard side...
  17. D

    Walmart non-toxic antifreeze

    OK ready for round two? All I said in my first post was that Walmart had non-toxic antifreeze for $2.97 a gallon that was it nothing else. I never told any body to use it in their engines or sugested that they do. I said that I've been using it with no issues and posted the ingreadience. I am in...
  18. D

    Walmart non-toxic antifreeze

    Good stuff bad stuff a gallon is a gallon no mater how you look at it. And I stand corrected I just checked my records I only used 12 gallons not 16 like I first said. Dave P.S. I am leading a charmed life; I have a great wife, a great family, a great job so I think I've been lucky more than...
  19. D

    Walmart non-toxic antifreeze

    OK here is the scoop on the "Walmart Cheep stuff". The brand name is "Super Tech" and labeled as RV & Marine antifreeze. it has both Ethyl alcohol and Propylene Glycol, water, Di Potassium Phosphate, colorant and fragrance. then it says for potable water plumbing systems, is compatible with all...
  20. D

    Walmart non-toxic antifreeze

    You guys are worried about corrosion protection; what about the salt water that sits in your raw water system for the better part of the week for 6 to 8 months out of the year. I think that does more damage than "Walmart cheep stuff". That is just my opinion. For what it is worth I got 9 years...
Back
Top