Can someone enlighten me on what kind of steering i have. I know i have power steering but thats about it. I think i need to replace the cables???? because everytime i take off the steering wheel to center it with the drive centered in short time the wheel will be off center again by about 180...
well here is what appears to have happened. The drive came off really easy as always..but this time i replaced the gimbal bearing and according to the boat mechanic I accidently installed it crooked a little and possbily not all the way????? so if that is the case i messed up the alignment by...
I have a 2000 sea ray 230 br..it has the 7.4l engine with the bravo 3 outdrive. I just pulled the outdrive for the yearly service and could not get the engine to align with the stern drive. The front of the engine is still too high and I have the front mounts adjusted all the way to the bottom...
I have a brand new WESTLAND factory cockpit cover and bow cover for a 2000-2001 230br in "toast". Buttons have never been installed on either cover. I also have a visor kit in "toast" as new also which comes with an aft curtain as well.Visor kit comes with storage bag.
these may fit other...
most likely Humbug cove here on lake pleasant...its where all the kids and partys go to be seen and to hangout...it can get pretty crowded especially on weekends when the local rock station has their pontoon boat out. I'll admit i have spent some time taking in the sights of the crowd but never...
i installed a 3 bank isolator on my boat. here is how i wired it up: from the alternator to the main charging post on the isolator. from the isolator i ran a wire from bank 1 to the battery selector switch A connection. i ran another wire from bank 2 to the B connection on the battery selector...
My transom tilt switch is black and is starting to look its age. Its black plastic merc switch square in design. Is there anything I can do to clean it up and make it look new again???
I just installed a new westland boat cover for my 230. It is sharkskin plus with a 5 year warranty. My question is should i spray the new cover with 303 protectant
right now or let it stretch out a little and get some sun on it??? :huh:
if you are talking about the bimini visor set and rear piece i have a factory set brand new in the carrying bag "toast" is the color of the set. I also have a cockpit cover and bow cover in "toast" too that is new never been mounted.I have a 2000 230br so it should all fit.
I need to install buttons on my cockpit cover and carpet kit and need a button installation tool. Which one is the best that will work thru these types of materials?
have been wondering how strong the tow eye is? I have pulled a tube with 3 grown adults on it from the eye but now im worried that may be too much?????