Search results

I have a 1989 340 sundancer. I just purchased this a few months ago. The generator keeps sutting down and popping fuses. It is blowing the stop fuse. If I replace the fuse as soon as I hit the start switch it blows. If I leave it for a week or so, the next time I am at the boat, I will replace...

Wow, so you think I should pull off the heads and check the rings? You meanthe rings around the piston right? Sounds like a big job. It may be Mechanic time!

I have a 1988 sundancer 340 with twin 454s. There seems to be oil blowing back through the hose out the valve cover. I am losing about 1 quart between oil changes. The spark filter( or what ever you call it) is black and full of oil. When I took off the cover I could smell oil and could see a...

There is not a valve from the pump out hose. There is a "T" fitting on the holding tank. Qne end goes to tank one to the pump out and one the the macerator.

there is not a ball or anytype of valve between the holding tank and the macerator

ok I am 99% sure I have the handles right. I have the handle part following the flow out the boat. Still no go! . . but when I take off the cap to the pump out hose, and fill it up with water and turn on the macerator it works. I can see bubbles come from under the boat. So that would...

so are you sayingI need change the springs and not the switch or is it all one kit? Where can I but it from?

MY vac pump runs all the time. I repalced the duck bills. No luck! When I push the spring at the end of the tank the pump cuts off. So is that it? Do I need to replace the spring or what? What is that part called, just the pressure switch? Can I buy one at west marine or is it special order?

my "Y" valves do not say anything on them. That is what is driving my crazy. How can I check the macerator with out taking the hoses off?

I have a 1988 sundancer 340, I need to empty the holding tank, but cant figure out where to put the "Y" valves. Sea cock is open and I know how to flush straight out from head, but not from holding tank. No matter what position the "Y" vlaves are in, it trips the breaker is I hold the...

One last question for yall,(yes that is a word down here in NC). My anchor bull pit or roller I am not sure what it is called is missing. The anchor just comes up to the bow and hangs now. I took the boat to the sea ray dealer and they said they could not replace due to the age. I dont...

Found it Thanks for all the help. There is a guy near Boston that makes panel. He is actually on this site, so I had a little luck. Thanks again

1988 340 sundancer panels Hey scott I got your name from Divedaddy over at boatered. I need new panels for my 340 sundancer. Does your light up like the factory? On mine the words light up ( Sterio, head, wipers . . ect) I need the panel behind the guages and behind the two switches. I...

I cant find Sealand on goggle. What is the complete company name? EDIT - I found it thanks again

What and where are the duckbills I have a 1988 Sundancer the the head sucks all the time. I thought this was normal for an older boat. How do I check the duskbills? OR is this normal for a boat my age? Thanks fo the help

I have a 1988 Sundancer 340 that I need the panel behind the switches and guages. I can not find them anywhere. I know they can be made, but the words on mine light up ( sterio, water, head . . ect. Does anyone know where I can find one of these. The part numbers are: 193060, 193078 ...