Search results

  1. H

    Bravo 3 III Mercury 22P prop set

    Set of Bravo 3 22P props Good condition, no vibrations, changed to a lower pitched set due to engine swap. 48-823664 and 48-823663 $450 for the set local pickup on Long Island or $450 plus shipping. call or text 516-697-8032 Happy boating!
  2. H

    How do I remove these fixtures?

    the clear plastic cover on my reading spots does not stay in place once popped out without a little adhesive on the edges. The first one as other have said - twists off - unscrew direction.
  3. H

    Cheap inexpensive LED upgrade

    Love the discussion on this. My only update is that we are approaching September and besides the bad bulb that crapped out within minutes the rest have gone strong all season, operating at a fraction of the temperature of the bulbs they replaced (talk about lighting paper on fire) while running...
  4. H

    Cheap inexpensive LED upgrade

    Took a picture the other night of the 2x(12 5050 SMD) festoons I linked in the original post that are sitting in the stock perko housings - one under the rear bench and one in the driver's footwell.
  5. H

    Cheap inexpensive LED upgrade

    I tend to research to the point of paralysis, and while I have seen warnings of this, one of the first things I did was monitor the bulbs at different voltages - standing battery, engine running battery, and house charger on - and I did not see any significant rise in temperature or output on...
  6. H

    Cheap inexpensive LED upgrade

    LOL, agreed. I tried for the most part to limit my part searches to well reviewed items, I tried to stay away from random ebay sellers, etc. The 12 SMD blue festoons had no reviews, but I had ordered other cutequeen bulbs for automotive purposes in the past and felt the quality was always...
  7. H

    Cheap inexpensive LED upgrade

    Nav lights were not on my radar, for the reasons you mention as well as the fact that one of the main drivers for my replacements was energy draw when on battery with engines off .. I'm not overly concerned about what my running lights are drawing while I'm underway... and I don't do a heck of a...
  8. H

    Cheap inexpensive LED upgrade

    (redundant title for easy searching) I decided to do as much LED swapping as I could on my 270 - and started the typical research online. There were a number of threads that were very helpful here, but most pointed to LED sources that frankly seemed incredibly overpriced for what they were...
  9. H

    Official 320 Dancer Thread

    I thought the 320 thread would be the best place to ask a question about 320 performance .. sorry. According to your info you don't even have a searay at the moment so I'm not sure why you feel the need to question whether or not I should be asking something. Anyway - I asked because I am...
  10. H

    Official 320 Dancer Thread

    Ive seen the speed/mpg consensus on vdrive/350s combo pretty much unanimous at ~23mph and ~1mpg, give or take. Can anyone with vdrive 6.2mpi combo chime in and let me know what kind of difference it makes? Does the factory SeaRay setup allow those 6.2's to get up into the higher rpms it likes...
  11. H

    Guys please help me out.. I have NO THRUST in high rpm's and its not a spun prop

    When I did my impeller this spring the one I was replacing was completely shredded with just one of the rubber arm things left. But it was still pumping enough to cool the engine - although in my case it was low RPMs where I was noticing some overheating last fall. If you ran through the muck...
  12. H

    missing trim endcap, large holes

    Also really want to understand what the holes are going into - is that part of the hull cored, etc.
  13. H

    missing trim endcap, large holes

    The replacement obviously was in another searay at one point and came from my detailer who just happened to have it lying around. It looks like the posts have fingers of sorts that are supposed to keep it from pulling back out - they are mostly gone on this one so my repair is going to have to...
  14. H

    missing trim endcap, large holes

    Noticed the trim endcap on the aft port side is missing leaving two nice sized holes through the side of the boat. 1) assuming the boat was run in this condition likely they were submerged at least momentarily by seawater - what potential damage could I be looking at if any? 2) repair...
  15. H

    Analog Tach troubleshooting

    Looking for tips on how to troubleshoot my analog tach. Boat is a 99 270 - guages are original. Boat was re-powered in 05 with a 6.2 mpi that has smartcraft. I have a northstar GPS hooked up that gets smartcraft engine info so I have an accurate smartcraft tach reading from there. But the...
  16. H

    Gear Lube Level

    I also have a slow leak in the gear lube fill container and have the exact same thing where the cap is always oily. Never thought that lube would be coming out the top of the cap.
  17. H

    Possible starter damage?

    Found that the positive connections on the starter solenoid where a little loose, tightened them up thinking I had it solved but still no go. Watched the starter as someone else turned the key, listened to the solenoid click but the armature wouldn't engage, figured it was shot. Took the...
  18. H

    Possible starter damage?

    OK - here's what happened. My batteries were 3 years old and I was trying to stretch the rest of this season out of them. No real problems were noted prior to this incident other than they weren't holding a charge as long, especially one of them .. So Labor day weekend the marina I usually...
  19. H

    I swear this is true I saw it with my own eyes.

    http://www.youtube.com/watch?v=OvAHYR5DnZE Audio as amusing as video.
Back
Top