Search results

I had a similar problem with my 2005 340DA a long time ago. However, the mid cabin floor under the sink area and settee area was wet when it rained extensively too. Long story short, what I found was that the forward port rub rail was improperly drilled near the navigation light area. There...

Looking to see if anyone has any experience with the MABRU Power Systems AC Units. Couple of threads without any detail. Original on my 340DA was a CruiseAir 12k that lasted quite sometime with a compressor failure. Replaced it with another CruiseAir 12k that lasted for 14 months with a...

My email address is bednarczykdavid@bellsouth.net. Send me a quick email and I will forward you the pics. Thanks.

I mounted an ice maker on mine after removing the 17" TV. AC receptacle already there. Makes it easy to drain the residual water from the ice maker directly in the sink because of the swivel mount. I bought a 40lb/24hr one from Amazon. PM me for pictures.

Kevin, Could you send a schematic. Bar napkin drawing is fine. Easier form me than following write up and pics. Thanks

Could you share the the Facebook with Youtube and provide the url?

I often wondered why the mirror in the head/shower was on a pivot. Didn't make sense to me but must of been some thought to it from the designers. Anyone know why?

During my last trip the display on my Raymarine C80 began to jitter and then ultimately blacked out. I assume this is due to the souther heat and age of +10 years old. None the less, it needs to be replaced. I prefer to replace it with the same model or the E80 since the Radar is a RD218...

This is exactly what I have been wanting to do with my '05 340. It looks great. Did you do the work on your own or did you have a contractor do it?. Any specifics regarding the rip out of carpet and installation of vinyl would be appreciated. You can send me details to my email address art...

I have a 2005 340 DA. Love it by the way!! I had a similar but different problem(s). After heavy rains the carpet was wet on the deck near the sink/step to bed on the port side. I also had wet carpet in the salon area near the vacuum. Underdeck storage had water in it as well. I made sure...

So just in the interest of curiosity, did you consider the difference in the weight between the carpet and wood flooring and how that affects the planing/stability of the boat? I have a 340 DA and was thinking of putting wood flooring in the mid cabin salon but felt it would add weight to the...

Dave, I have a 340 DA and was experiencing what I considered to be less than par performance with my AC unit this past summer. I clean my strainer regularly each month and flush the lines with fresh water (from the dock) for about 10 to 15 minutes. I keep my unit on 24/7/365. I was...

Does the table fit in the area underneath the deck in the spot that the OEM table was without modification?

I appreciate the posts/comments and after several hours of sale site reviews and trips to various marinas I decided on a forward leaning mount. I would have to agree with GFC, and so did the mount manufacturer, that the line of mount should be consistent with the angle of the radar arch from an...

Understand the bow rise elevation principles at cruise or at rest position as this could be adjusted with shims or wedges to ensure that the plane of the radar is level with the horizon or water surface at cruise speed or slightly below. I am referring to the actual radar mount (physical...

I am going to install a Raymarine RD-218 radar radome on my 2005 340DA next week. Trying to make a decision as to whether I should mount the radome with an aft or forward leaning radar mount. I have look at several pictures and found both mounts installed. I can't decide which has the better...

Another item that has gone EOL from LG. Great! I recently had to replace the magnetron in the micro/coffee-maker on my '05 340 SDA because the installers at the OEM didn't remove the scratch resistant protective covering from the microwave vents and I essentially cooked the microwave...

Just for the record, my sink was cracked at the drain. I was able to purchase a bar sink drain (and plug) from Lowe's for about $7.00 that was large enough to cover the original cracked area. The drain is now 1 1/2" vice the 1 1/4". I also rerouted the drain line around the back of the fridge...

Has anyone had any work done in the Charleston area by IndyCanvas? I had them give me an estimate, with some custom options, and it seemed to be reasonable.

I realize these are older posts but I am trying to replace my cockpit sink in my '05 340DA. Sink is cracked at the drain. Contacted Sea Ray today and they told me that Part No. 1689318 was no longer available and has been discontinued. Does anyone have any recommendations for replacement...