Replaced the galley and front head faucets but water keeps leaking at the black plastic fittings, there are yellow rubber washers in them, I’ve tried but can’t find replacement washers.
Anyone have a source for washers or better way to replace the fittings with newer shark bite that slip on...
Asking for a friend who lost One of the three windows on the starboard hull on his 2007 38DA Sundancer.
Anyone ever have this happen?
Anyone have a source of where these can be purchased?
Thanks
TWAS THE NIGHT BEFORE CHRISTMAS and all through the boat,
The bilge pumps were hustling to keep us afloat,
The children were nestled all snug in their berths,
(We sleep here most nights to get our money's worth)
As Ma read Jackie Collins and I guzzled beer,
She said "You've had enough, now come...
I have a 2005 420DA with original Raymarine C90 & C120 Chartplotters and Radar.
Have an opportunity to purchase, Raymarine GPS/Radar/Chart Plotters
RayMarine a95 9" Screen & RayMarine a125 12" Screen.
Would I be able to swap these newer units, plug and play, with what I have now ?
Was looking at...
It’s about time we start discussing if and where we want to gather this year.
In the past we have done South Haven, Manistee and Grand Haven on the East side of Lake Michigan, any interest in Wisconsin or Illinois? Dates?
Ok, who are your favorite authors or any good books you’ve read?
I have never been much of a reader but a few years back a good friend of mine’s son who was a Navy Seal lost his lost his life in Afghanistan so that got me interested in reading anything I could get my hands on about the Seals...
Just a date hiding in the history books but for me this date has spiked my interest lately. As I have traveled from port to port on Lake Michigan the past few years I never get tiered reading about the 1500+ shipwrecks scattered about, even as travel over a mark on my chart plotter, I think...
How has the Government shutdown affected you, after 20+ days most of us are touched in some way.
For me, we are selling our business and the buyers are getting a SBA loan, we were weeks away from closing, everything was approved but now everything is on hold because no loan number was assigned...
Yesterday was oil change day, so I did my normal routine of warming up the generator and it ran just fine. Used the oil pump and pumped out a gallon of oil and changed the oil filter, pumped a gallon of new oil back in and changed the racor fuel filter. I went to start the generator after prime...
We will be taking a whirlwind trip July 7 - 14th. Manistee to meet up with Jim McGee for the Rendevous, then up to Frankfort and over to Sturgeon Bay then down to Sheboygan and Milwaukee and back over to Grand Haven. All if weather permits. I have never been to Sturgeon Bay, is there any good...
It would be great if someone could take the reins and organize a renedevous this year, I have been to busy.
we had a great time last year in South Haven!!
I just purchased a Standard Horizon HX870 DSC Marine handheld with GPS and need opinions about setting up the MMSI number. Seeing it's a once and done procedure I wanted to know how those of you that use a handheld as a backup VHF, setup the MMSI number. Do you normally get a separate number...
I'm getting ready to purchase a SeaLift platform for my 420DA, looking at the 10'6" x 4' model with the fiberglass platform that has the pop-up chocks to hold the dinghy. I have read some of the older threads and seems that everyone that had them liked this model.
Anyone still using one of these...
My STBD side sea water pump is leaking water from the bottom of the shaft. I replaced the o-rings in and out and the impeller face plate. Is there a seal on the shaft or and I looking at a new pump?
I have a KVH M2 Satalite antenna on my boat, the previous owner took the receiver with him, now I'm trying to get this working again. I e-mailed Tracvision customer service and they informed me the this antenna only works with Direct TV and I need to find a KVHM-10 Mobile receiver. Hard part is...
With so many boaters in Lake Michigan has there ever been a Club SeaRay gathering? Wondering if anyone would like to get together this summer? Lots of great ports on both sides of the pond!
An item on my list of things to do list this winter is to replace the pencil zincs on my 6CTa engines and 9.0 Onan generator .
The zincs on the after coolers and heat exchanger are about 50% I would emagine after inspecting one of them. I have never done this before so I have a couple...