Search results

I have a 1997 Westerbeke 7.0 BCG gas generator that need a new exhaust manifold, part number 037320. They are discontinued so I need a used one. Mine has a hole in it at the exhaust flange, which is common. Can anyone help? I"ve searched EBay, google but no luck.:huh:

I'm repowering my 1997 370 EC with new 8.1's and have two running 7.4's for sale. The blocks have 880 and 920 hours on them and the rest of the engine parts have 1214 hours on them. The risers and manifolds were replaced last year as well as all the coolers which were custom built with zincs...

I snapped the collar on tee in my freshwater system and can't find a replacement part. I have a 1998 370 and the part is made by Genova but they sell only wholesale. Any body bought one?:huh:

I'm replacing a blown tranny and someone said make sure to replace the damper. Well, they're $420 plus shipping, not so cheap. How do you now if it needs replacing?

While cruising Tampa Bay yesterday, my transmission oil cooler failed and all the fluid went out the cooler and the tranny self destructed. I have 7.4 ltrs. with straight Velvet Drives. Any body had to replace one of these and about how much $'s I'm looking at? I have a 97 370 EC which makes...

I need your help with a tach problem. I have a 97' 37 ec with 454's. Both tachs behave at idle but anything over 1200 rpm. they read erractically. Sometimes they both read exactly the wrong rpm and sometimes one will be right on and the other will be hundreds over. Then they may switch. New...

I tried to remove the 2 allen head bolts holding the chain pipe cover on. They appear to be corroded in place. Anybody have the same problem and what's the fix?

I'm going to Chesapeake Bay this summer and I need paper charts for the Bay and a Garmin chip for a 2010C. I think the Garmin number is US006R. This would be for just the Bay, I already have from Florida to Norfolk. Thanks

It's time to change the raw water impellers on my 7.4L inboards on my 1997 370 EC. Fortunately I have plenty of room around the engines to work. My question is, do I have to remove the pump bracket and the belt tensioner from the block to remove the pump? Once you have the pumps on the bench...

I have a used set of Weaver davits and Quick Kits. I also have 2 24" weaver standoffs and the metal brackets for the dingy pads. I also have EZ quick release swim platform motor mount. I will seperate these as needed.

Anybody out there got a 1997 to 2002 370 EC? I have a question about the mirrors in the head. :huh:Thanks

Between Merritt Island and myself, we can't find the galvanic isolators on my 1997 370EC. We've narrowed it down to behind the reefer or the hinged mirror in the head. Anyone know where they are? :smt021

I discovered last week that my mechanical fuel pumps on the raw water pumps were leaking fuel into the oil reservoir on the pump body. I ordered new fuel pumps and removed the old ones expecting to see a cam on a shaft driven by the pulley. This would be the setup I'm used to seeing on old car...