I have installed them a month ago.
I am satisfied with the performance.
You can also take out the accumulator.
I do not have experience yet with the life time...
Until now I say buy...........
The boat is totally sanded and repaired.
Then multi layer of primer (awl grip)
sanded agian
Multi layer awl grip primer
minor sanding and spot repair
multi layer awl grip topcoat
The deck is treated the same but with awl grip anti slip topcoat (partially)
The aluminium is sanded, then...
I did the test with the airfilter off, the port engine is not making the punching noise. It comes from the inlet and there is no fibration in the engine which causes this sound.
I will test the turbo on thursday and will come back on this.
Thanks!!!!
Since last week my stb engine is giving a lot of blue smoke.
(Also hot)
After opening the airfilter we noticed that there was hardly flow into the turbo compared with the other engine and the intercooler seemed totaly full with oil.
After cleaning the intercooler the blue smoke is not...
This is indeed the problem.
I turned the halon override button on and everything worked !!!
Is is the purple wire that is interrupted by the halon system
Can somebody tell me where to buy replacement instruments for a 1990 420DA.
I want to replace oil pressure, voltage, rpm, volts, temp
Thanks for your help!!
Here some additional photos during the construction.
An advise: sandblasting the underwatership with real fine sand (forgot the name) with little water. this will remove all antifouling and gives a perfect surface for the new primer and antifouling. (Do not sandblast the rest of the ship :grin:)
I have indeed installed the hatches backwards.
I thought that this would be more convenient on the water......
I am goiing to change that again since they are leaking a bit.
The hinges must be higher, else water will remain there and leakage will follow.
REALLY MANY THANKS !!!
I have broken my head on this, I have taken out the halon switch and threw it behind the dash to further work on this in the winter.
I am convinced that the problem is here.
:smt038
Here some additional pictures.
Better pictures will follow, boat was not completely finished when taken some pictures.
Coming winter I will continue with upgrading the boat (mainly technical)
Now, I will use it as much as possible !!
I have renewed total interior, sandblasted underwaterline, total paint, all fabrics new and replaced all seats with sunbrella fabric. Redesigned panels in the boat, renewed dashboard.
I will add some beter pictures next week.
For me this is a new boat in the old style
I have a problem,
My engines don't start and the generator stops after releasing the preheat button.
The engine stop relais does not get power while there is power on the dashboard (pink wire) I have bypassed this wire but I wonder if there is somewhere a breaker that I missed.
I still don't...
Hello,
I am new on this forum and i would like to introduce myself.
I have bought a 1990 420 Sundancer and gave it a complete refit.
Some pictures are added.
Greets,
Ernst
See also: http://www.youtube.com/watch?v=sMA6JgrQbEA