Search results

Can anybody tell me how bad it is to change the actuator on a 330. It looks real tight in there. Do the risers and manifolds have to come off? When I get the new one, will the wiring be the same as the old. Thanks for any input, I'm really dreading this job.

What is everybody doing for sirius radio ? I have the stock clarion unit. I have tried to hook up the portable unit from my car, but the clarion won't let me lock in a station to transmit the sirius. It only scans and locks into a station that already plays music . I'm sure there are some units...

Can anybody recommend a good local carpet guy on the south shore around the patchogue/bellport area.

can anybody tell me how to get to the fuel sending units . The starboard side and the port side as well. Is it possible that there can be almost 1/2 tank difference between the two tanks ?:huh:

I just received my new screens and rubber gaskets from bomar. I'm not sure how they get installed. The big gasket is round (seems to big for the screen) and has a channel all the way around.

Is it normal for the fresh water pump to randomly kick on if the water is not being used ? It may run for 30 secs. to a minute, then shuts off . I don't remember it doing it that last year , anything I could check ?

I have the 7.4 mpi fresh water cooled motors, can somebody tell me where the pencil zincs are located so I can change them . Does anybody have any pictures of the location on the exchanger . How about a part # from boatzincs .com...

Can anybody recommend a mobile soda blasting company in the Patchogue/Bellport area? What are your thoughts on bead blasting ? A company called No-Chem in Holbrook only does bead blasting, he sounded reasonable, but I heard soda is the way to go. thanks ...

Can anyone tell me the correct part # for the zinc on the back of the hull ? ( its oval) . Ive never changed them out, its my 1st year with the boat . Also on the shafts, I currently have 2 zincs on each shaft . Is that overkill ? Can I use just one on each? Lastly, the ones on the sea...

Has anybody ever used Collinite insulator wax ? I know Collinite wax in general is a good wax, but anybody have any input on the insulator wax? I met this guy over the summer , he had a '93 44 dancer that shined like brand new. He said he uses meguirs 49 then the insulator wax, he swears by it...

I was wondering why nobody has their flat screen t.v mounted above the aft cabin. I think that is the ideal place for a tv, yet you never see it. Is it possible? If anybody has it can you please post pitures and detailed mounting and electrical hookup instructions. thanks alot

anybody ever repair a u-line sp-18 icemaker ? The freezer works fine but it won't make any ice. The arm is in the down position and I already replaced the water inlet valve thing( can't remember the nameof that part ) that the water hooks up to. Still nothing :huh: . I hate to have to buy a new...

I need a new anchor , was thinking of the plow style . I have a 330 dancer , can anybody recommend the right size for my boat ? What are your thoughts on the hinged version vs the non hinged one . thanks

well its not exactly the pump, does anybody know why I get water in the compartment surrounding the shower sump pump? Where is the water coming from?

probably a silly question... but can someone tell me how to turn the macerator on on my 330? I turned on the switch on the main panel but nothing happened. Should I hear the pump run, or is there another switch I don't know about. Or maybe it's broke .

Maybe somebody can help...... I have the 7.4 mpi's in my 330 sundancer. In July I had the starboard motor replaced with a new mercruiser longblock. The pressure gauge on the dash reads only 20 lbs. The mechanic who replaced the motor, claims he replaced the sending unit already , I replaced...

I just received my new dash panel for my 1999 330 dancer from vector imaging. Looks great,took a real long time to get,but hopefully it will fit nice. Can somebody please explain how to remove the dash board rocker switches ?

Hello everyone , My name is Chris , I just wanted to say hi before I hammered you guys and gals with many many questions . I am currently on the market for a late 90's 330 dancer and need some input the 7.4's . mpi's vs carbs . I have my eye on two 97's ( both v-drives), the mpi is a...