I recently noticed that our depth indicator is no longer operable. We're going to be trailering her tomorrow or Friday to Friday Harbor. Are there a few simple things that I can check while the boat is on the trailer?
Thanks,
Dave
Does anyone in the Seattle/greater puget sound area have a recommendation for a service tech? Our trailer is once again serviceable so we can tow Beulah from where she is berthed on Lake Washington if need be.
Thanks,
Dave
My oldest has proposed a trip to the Princess-Louisa-Inlet this summer. We've ventured as far north as the Indian Arm and we're thinking about embarking north from Blaine this time to minimize (ha!) our fuel costs. Does anyone have any experience traveling to the Princess-Louisa-Inlet? From...
This is complete price from the canvas shop. If I sourced it from Great Lakes, I would have to find someone to complete the installation..no?
Thanks,
Dave
It's been 10 years and it's time to replace the canvas on our 280DA. We've received a estimate of $4500 to replace the canvas which includes the camper rear, a new slant top, and higher quality front windows (3) (isinglass).
Is $4500 in the ballpark or should we continue to shop around...
After resetting my GFI, I plugged in the space heater. The heater promptly started smoking. I plugged in heater inside the house---no problem; heats up fine.
What's my likely problem and how do I troubleshoot/repair?
Thanks
Sent from my mwp6985 using Board Express
To close this thread, the septic filter was clogged because we had waited too long to vacuum. The clogged filter caused a vapor lock and preventing the system from drawing effluent from the toilet to the septic tank.
Sent from my mwp6985 using Board Express
It seems likes it's working now for the most part. The boat can actually sense when I'm doing a 180 turn to begin my docking procedure to immediately shut off the starboard engine but only intermittently. Oh well.
Thank you.
Is there a gel coat repair kit that I can use to seal up the crack before it gets too bad? Should I have a specialist take a look at it first?
I noticed yesterday a small circular crack on the top of the non-stick surface of the bow. What is best way to repair? Is presure washing this surface advisable?
Thanks
I replaced the IAC and everything seemed fine....for awhile. The starboard engine idled fine until we got close to the dock and then it decided to shutoff and not to re-start.
Thanks. I'll give the IAC replacement a try tomorrow. My wife has multiple outtings planned for the weekend so I'm going to be (back) in doghouse if I don't get this resolved.