TAch isn't working, so how do I remove the dash or the gauge itself. It's the stock gauge. Does it just pull out? or do I need to remove the dash?
thanks
Paul
Heya Guys I have a 87 250da powered by a 350 CID motor and a OMC cobra drive. I had 10 people on it and couldn't get it on a plane even at WOT....in the near future I would randomly like to pull a tube or two. I don't know the oem prop size, just yet.
How can I prevent this in the future...
yesterdays ride, a bit windy with whitecaps
1 12inch kicker with a kicker amp and party lights, Xm radio, fancy fishfinder, 350 omc 632 hours, very well taken care of most receipts for paper work. He thinks he's moving so he sold it for 8k to me with jackets, water toys....only thing I need...
what experience have you had with a boat patch/reglass?
I looked at a great boat this weekend ran/sounds great everything worked fine. While looking at it owner pulled it in/out of the water becasue one of the rollers were sticking vertically up (boat looked like it would tip off the trailer)...
27' with 10.5 beam
He wants 11,000 for it. personally I think it's high. He's replaced the port side motor and it has 15hrs on it. It's on the lake and in the marina I want. It's twin v6s with 205hp mercs. The guy is trying to move and is waiting on the boat to sell, he has lowered the price...
with a 19 pitch prop (48-832830-c1-19) on an 89 sundancer 5.7, 350 alpha 1 what would be max rpms and speed hypothetically?
Also does it make a difference if a compression test is done when warm or cool psi wise?
the test results I first got were avg 150psi on one bank and 180psi on the...
I posted in the cruiser section thought I'd try the generals out. I got it out for a Lake Trial
I took CSR advice and went with a 89 250DA/w 5.7l alpha I
1) I got it up to 3500 rpms is that max?
2) The volts stayed around 13-14 volts while cruising, that normal?
At really low speeds no...
it has a 350 chevy in it with 730hrs. He's owned it 5yrs and only puts it in the lake 6-8 months a year then pulls it out. Changes motor/outdive oil with light mait. on it. He's had it out of the water this last yr for medical reasons. It comes with a tandem axle/braked trailer and he wants...
268 Sea Ray Sundancer 1989 268 SUNDANCER CABIN CRUISER
350 - 260 HP BRAND NEW RISERS AND MANIFOLDS, NEW PWR STEERING PUMP,LOWER UNIT COMPLETELY RESERVICED, NEW IMPELLER KIT AND ALL SEALS
LARGE COCKPIT 8.6 BEAM TEAK SWIM PLATFORM
3 BIRTHS / AFT CABIN/GALLEY DINETTE/V BIRTH
SINK 2 BURNER STOVE...
Was searching for Sea Ray reviews and found this site. So of course I'm digging around. My family owns an island in NY between clayton and alex bay near the rock island lighthouse, but am from Texas. I'm looking for around a 23-27ft boat. Found an 89 220DA 4.3 with alphaI drive, will this be an...