Separate names with a comma.
There is a tag right on top of trans with mode and number
I took the whole thing out as it was a pia to try to get the bolts back in impeller housing the first time.
And the switch at the helm does not turn the lower in either?
My lower one went out but not certain what your issue is.
I know I checked it out but no love for the old 92 330
A+ sir! Looking good
Thanks gives me a good baseline. I need to get the ultra cut, chroma polish, new black wool and the green wool pads for this year.
Anyone want to share where they bought? Lol
Any place in particular you found good prices on?
Yes I am near end of C dock 109,
Looks like you are on D?
Puzzled is my sea rays name
Myroc are you in Bouvier Bridge marina by chance?
Lol awesome, didn’t think I had a boating neighbor in The Warren!
Yes please post up what you find
getting to be that time again!
I was wondering where everyone who uses presta products has found to be the best place to buy them?
I think I...
That’s what I went with, then the light cutting creme with the ultra polish last. Ugh then that damn two coat of collonite fleet paste wax. But...
Yep what he said.
The best way to avoid heavy compounding is to do it once really good, then keep up your finish with good polish and wax coats.
I think I had the same prob as you first year of boat ownership. Spread too thin used about a gallon on my 330. The next year I used two gallons...
I think I have it right, just got to verify when I get home. This site is awesome as always! Happy boating to all!
That has to be it. It should be blowing air out front of unit not sucking it in.
Ok so I guess I need to take a look at how the fan blade is installed. The old one crumbled and again loss of my original picture I took of ass...
Yes here that is but the original wires to the fan were both black. So that is why I’m asking the question as I may have it wired backwards and...
I have this ice maker installed in my boats cockpit. I recently had to rebuild the ice making portion of it as well as replace the fan motor. I...