Separate names with a comma.
They are in tight. Watch for your fingers. I usually get it started and work one side out then the other so the springs don't get me.
I only use reverse for tranny fluid as it is way easier than manual. Oil I pour 5 gallon drums. I also have a new transfer pump just to put oil in...
Not sealed. I have taken mine apart before, but I do have newer model. But they are similar.
You don't really need th bulb. If bow moves it on.
The module can be disassembled, but might not be worth the effort to try and get it fixed. Call Vetus me get a new module.
I have hit a few over the years that ar submerged. I have only had 2 hat the line got tangled. The others I have been lucky enough that my props...
I have heater elements in my engines. That I use on really cold nights and a bilge heater to keep temps at 65 degrees
St me add a twist. The N2k will transfer th data, but some features need a hub. For example if I wanted to upgrade all my Garmin at once I would...
The impeller for a Cat 3196 is threaded. I insert a long bolt in it and just unscrew. It is really simple. Now getting to my part impeller is...
I have used Zglobal. They are good.
I have the same bridge table, but they are too big. Thought about Vitrifridge for cabin.
This might be one of my winter projects, so I'm hoping we get some good guidance on removal and good replacement models. Thanks everyone.
We are located in NC 4 slips down from Bahamabresus. My boat will be at Moorehead for the month of May. I will try to say hello. We have a few...
That is great. Once again this 480 group is the best. But I'm biased.
So not sure what that means by gutting the ballast out. I don't know much about electrical. I looked for replacement tubes, but could not find any.
Looking at starting a new project. I noticed the ER lights run off the 12v side although I have a bilge/cockpit switch on both the 120v and 12v...
My 340 had a leak coming through the running lights. Then into the closet. Took me forever to figure out. Others have had the same issue with the 340.
I sanded all of the gold off of the bezels. I then painted with a nickel paint. They look great!
Ouch, I'm sorry. I used to put the boat away when we lived up north.
If you are willing, Next time you are spooling up do it slowly and see if it occurs. It would be interesting if it is just cavitation or not. Thanks.