Separate names with a comma.
Are your CO detectors all in date and working?
Congrats on a great boat.
Where are you located in the world?
BTW it's easier just to embrace the gold. :)
I'm up in Chattanooga and I use my boat from time to time during the off months. My winter routine is to winterize the fresh water system and...
Do it right or don't do it. Can't stand the look of unfinished edges.
You can definitely tell who does the cheap.
If you have a Battery Plus in your area check their prices as well. Sams Club also runs some killer deals.
When the time came last year I did 3...
If there's a way to tie both batteries together via a battery switch on "both" I would get buy a pair of like batteries.
I also have a few weird vibrations at lower speeds that seem to smooth out higher in the RPM range. I know I have one slightly bent...
I'm glad I started using Marine/RV TP unless it dissolves in your hand mid wipe. o_O
The novelty of that place has wore off so I'm not likely to return. If you don't plan your visit and get there early the wait can be unreal.
How fast does the water enter the bilge?
I used a small shop vac to vac out all the water in my bilge and climbed all over the place to witness...
Check your distributer and distributer cap. Make sure it's secured and seated correctly.
When I changed out my rotor button and cap on my VW one...
Just an update.
Yesterday I ran down to the boat to do a light winterization. Topped it off with fuel after adding some fuel stabilizer, cleaned...
Do you have a tic tracer or volt meter?
You can do some simple test to see where you have and don't have power when trouble shooting the charger.
I'm at Chickamauga Marina but on the page above you will see they have 4...
This must have been it. In the last 2 weeks I was away from the boat the kinked area must have relaxed. I had a great shower today.
You need to check your own set up but the bilge pumps should be wired independent of the main battery switches.
If you have a lighted bilge pump...
Wonder why he/they did not drill the actual bolt?
Even if you nick up the threads they can be replaced.
The hinge on the top of the window looks to be bent. Bend it back in place and I bet it will close. I had center windows on 2 boats and both were...
WOW, How many hours did you have on the twins?
Did the hydro lock occur because of leaky manifolds which in turn caused the hole in the block or...
I take it you are out at sea somewhere if and when you want to use the macerator?