Separate names with a comma.
I clicked on the top left for Vaughn Live, that took me to Gash TV, I didn't mind it!
something's wrong with the contrast, all I see is white?
Happy New Year!
Not sure if this is it, but found this on fleabay and remembered your post....
I would just stick a rag in the opening for the winter.
on little carbs I remove all rubber, separate bowl, float, needles and slow boil in a stainless steel pot in water for an hour, then blow them out...
I just did this, or I should say had it done.
I tried doing it myself, the first attempt didn't look so good and with the splice feeding through...
I tell my guests that in the cockpit by design the horn sounds wimpy but up front at the anchor and forward it will deafen you and...
they have two springs attached to the fixture, they just pull down, the head fixtures are a lot harder to pull out then the cabin fixtures, pull...
We renamed our boat a couple of weeks ago on our holidays, to " Gimme Shelter "
did the denaming and the renaming ceremonies, a couple bottles of...
That's a great list!
I will add... make sure that all the manuals and service records are with the boat
sometimes I have to loosing the connection (output side) of the pump to prime if I have run out of water
I had a thru hull transducer that would only leak while under way
I moved Marinas this year and for the first time I'm bow in at the slip, bow in is harder to dock then stern in, have you tried stern in? stern in...
I use this http://www.crutchfield.com/S-03m4o18erGs/p_819BD1/Paradigm-BD1.html it works great as well, I extended the cable to the cockpit.
I had this problem and plugged the good outlet outside on the hull, that cleared the blockage it's been good since.
Thanks for taking the time to video, learned a lot!
lost my stbd engine 15 miles from home, water pump blew up, auto pilot saved the day, kept it straight on course! docking was a different story
we replaced ours with a Keurig single cup machine, freed up that cupboard space.