Separate names with a comma.
Send it to me. I’m happy to repair and test.
Very good information!
I changed the fluid and filters in both of my 2002 (340) zf 63 v drives a couple if weeks ago. Since then, I’ve put about 4-5 hours on...
simply do not turn on the water pump. City water pressure will take over. City water pressure will not reverse itself back into your fresh water...
Pull it out from the filter location, put it in at the dip stick
I jusrt did mine. Reach down and take a pic of the mfg tag and let me know the model.
Btw, if anyone needs any pointers on changing ZF 63 IV ATF fluid, I can help. Just did both of mine. Pretty simple.
[ATTACH] I stand corrected (in my orthopedic shoes!)
Upon further investigation, I found the water/fuel separators, way down on the strbd side of...
Very good point. I shall investigate further.
Nope. There is a water/fuel sep for the genny, but the only others are the mentioned above!
Duralast Fuel Filter FF3504DL
TRY ff3504. Your boat is plumbed correctly.
Just replaced 2 on my 340.
Auto Zone had in stock.
Thinking of replacing with spin on water/fuel seperators.
If your in the states,
Message me your address and I’ll put 4 in the mail for you, n/c.
(4) 2n 3906
Looks like the mercon is compatable!
Thanks for your help.
Fluid level is down to the lower nark on port tranny.
Book says Valvoline type d or multipurpose.
In a pinch is it ok to use Valvoline...
Let me know if you need any help!
Have you installed it yet?